-
Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
National Institute of Standards and Technology —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... -
Federal
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
Department of Commerce —
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-... -
Federal
Smartphone Data for Development of Indoor Localization Apps
National Institute of Standards and Technology —
The PerfLoc Prize Competition (https://perfloc.nist.gov) was developed by NIST during 2015-2017 and was run during 2017-2018. The Competition was concluded with a... -
Federal
Wind speed estimates of the December 2021 Quad-State Tornado in Mayfield, KY based on treefall pattern analysis
Department of Commerce —
A violent tornado outbreak occurred on December 10-11, 2021 in the Midwest US. One of the tornadoes, known as the Quad-State tornado, tracked across four states and... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Wind speed estimates of the December 2021 Quad-State Tornado in Mayfield, KY based on treefall pattern analysis
National Institute of Standards and Technology —
A violent tornado outbreak occurred on December 10-11, 2021 in the Midwest US. One of the tornadoes, known as the Quad-State tornado, tracked across four states and... -
Federal
AM Bench 2022 3D Build Modeling Challenge Description Data (AMB2022-01)
National Institute of Standards and Technology —
The following data files are provided in support of the 2022 Additive Manufacturing Benchmark test series (AM-Bench 2022) modeling challenges associated with laser... -
Federal
Dynamic Polymer Annotated Library
National Institute of Standards and Technology —
Dynamic Polymer Annotated Library (DPAL)DPAL is an annotated library of peer-reviewed research that aims to: (1) Fill a knowledge gap in the materials science field... -
Federal
Validation Data and Control Software for ATIC: Automated Testbed for Interference Testing in Communication Systems
National Institute of Standards and Technology —
Validation data and software for the paper, "ATIC: Automated Testbed for Interference Testing in Communication Systems," to appear in Proceedings of 2023 IEEE... -
Federal
Theory aware Machine Learning (TaML)
National Institute of Standards and Technology —
A code repository and accompanying data for incorporating imperfect theory into machine learning for improved prediction and explainability. Specifically, it focuses... -
Federal
Hot-wire anemometer gas speed measurements in a commercial laser powder bed fusion machine
National Institute of Standards and Technology —
Gas speed measurements using hot-wire anemometers (HWA) on a commercial laser powder bed fusion (LBPF) machine were recorded as a function of position (X, Y, Z) and... -
Federal
Per- and polyfluoroalkyl substances (PFAS) Interferents List
National Institute of Standards and Technology —
A table of known interferences for per- and polyfluoroalkyl substances using mass spectrometry. -
Federal
Smartphone Data for Development of Indoor Localization Apps
Department of Commerce —
The PerfLoc Prize Competition (https://perfloc.nist.gov) was developed by NIST during 2015-2017 and was run during 2017-2018. The Competition was concluded with a... -
Federal
Generator Fleet Characteristics Model
National Institute of Standards and Technology —
When run, the GFCM creates tabular and graphical data of the hourly operating status and market outcomes for the generators that make up the electric generating fleet. -
Federal
Optically Distributing Remote Two-node Microwave Entanglement using Doubly Parametric Quantum Transducers
National Institute of Standards and Technology —
Data presented is part of the journal manuscript "Optically Distributing Remote Two-node Microwave Entanglement using Doubly Parametric Quantum Transducers." Data... -
Federal
Data for manuscript: Scalable and Robust Beam Shaping Using Apodized Fish-bone Grating Couplers
National Institute of Standards and Technology —
Experimental and modeling data for manuscript "Scalable and Robust Beam Shaping Using Apodized Fish-bone Grating Couplers" by Chad Ropp, Dhriti Maurya, Alexander... -
Federal
Dual-Frequency-Bias Programmable Josephson Voltage Standard Circuit
National Institute of Standards and Technology —
This paper presents a 2 V programmable Josephson voltage standard with dual microwave frequency inputs and multiple output taps. The design provides three main... -
Federal
Datasets from an interlaboratory comparison to characterize a multi-modal polydisperse sub-micrometer bead dispersion
National Institute of Standards and Technology —
These four data files contain datasets from an interlaboratory comparison that characterized a polydisperse five-population bead dispersion in water. A more detailed... -
Federal
Data and code for "Predicting the toughness of compatibilized polymer blends"
Department of Commerce —
This code and example files were used to run the self-consistent field theory parameterization in the publication "Predicting the toughness of compatibilized polymer... -
Federal
precisionFDA Truth Challenge V2: Calling variants from short- and long-reads in difficult-to-map regions
Department of Commerce —
The precisionFDA Truth Challenge V2 aimed to assess the state-of-the-art of variant calling in difficult-to-map regions and the Major Histocompatibility Complex...