-
Federal
Wi-Fi and Bluetooth I/Q Recordings in the 2.4 GHz and 5 GHz Bands with Low-Cost Software Defined Radios
National Institute of Standards and Technology —
This dataset consists of baseband in-phase/quadrature (I/Q) radio frequency recordings of Wi-Fi and Bluetooth radiated emissions in the 2.4 GHz and 5 GHz unlicensed... -
Federal
Radio Access Network Anomalous State Detection Dataset
National Institute of Standards and Technology —
This project [1] produced two types of data: Working Data and Derived Data. The Working Data includes raw measurements collected from a Radio Access Network (RAN)... -
Federal
Observation of Asymmetric Sideband Generation in Strongly-driven Rydberg Atoms
National Institute of Standards and Technology —
Improving the bandwidth of Rydberg atom-based receivers is an ongoing challenge owing to the long-lived Rydberg state lifetimes that limit the refresh rate of ground... -
Federal
Reference Data Set of Human Skin Reflectance
National Institute of Standards and Technology —
This data set contains 100 reference reflectance spectra of human skin, spanning the wavelength region from 250 nm to 2500 nm. The spectra were acquired with a... -
Federal
Microwave oven interference measurements at 2.4 GHz
National Institute of Standards and Technology —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. This band also includes microwave ovens... -
Federal
Mapping of NIST Cybersecurity Framework Subcategories to Threat Scenarios from the National Electric Sector Cybersecurity Organization Resource (NESCOR) Electric Sector Failure Scenarios and Impact Analyses - Version 3.0
National Institute of Standards and Technology —
This document identifies the NIST Cybersecurity Framework Subcategories that map closely to the potential mitigations within Advanced Metering Infrastructure (AMI),... -
Federal
JP-10: Experimental and Derived Thermodynamic Properties
National Institute of Standards and Technology —
This document is part of a series of reports describing experimental property measurements completed at the National Institute for Petroleum and Energy Research... -
Federal
Radio Frequency Interference Measurements of Industrial Machinery
National Institute of Standards and Technology —
The 2.4 GHz ISM band is shared by Wi-Fi, Bluetooth, Wireless HART, ISA100.11a, and several other industrial wireless systems. Our dataset contains comprehensive... -
Federal
Process-structure-properties investigations for laser powder bed fused IN718 in the as-built condition
National Institute of Standards and Technology —
This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different... -
Federal
Using Open-Path Dual-Comb Spectroscopy to Monitor Methane Emissions from Simulated Grazing Cattle
National Institute of Standards and Technology —
Data published in the paper "Using Open-Path Dual-Comb Spectroscopy to Monitor Methane Emissions from Simulated Grazing Cattle". A controlled methane release... -
Federal
GIAB Benchmarking of HG002 Assemblies from HPRC Year 1 Bakeoff
National Institute of Standards and Technology —
The Human Pangenome Reference Consortium (HPRC) tested which combination of current genome sequencing and automated assembly approaches yields the most complete,... -
Federal
A mathematical framework to correct for compositionality in microbiome datasets
National Institute of Standards and Technology —
This repository provides the raw data and analysis code used to demonstrate the implementation of a mathematical framework that uses internal standards to correct for... -
Federal
Hurricane Maria Wind-Field Model for Puerto Rico
National Institute of Standards and Technology —
This data comprises the wind-field model for Hurricane Maria in Puerto Rico, which occurred in 2017. Wind speeds are reported as equivalent three-second peak gust... -
Federal
Mapping of NIST Cybersecurity Framework v1.1 to NERC CIP Reliability Standards
National Institute of Standards and Technology —
THIS DATASET IS OBSOLETE. PLEASE REFERENCE THE NEWER MAPPING IN OLIR (https://doi.org/10.18434/mds2-3215).The spreadsheets in this data set map National Institute of... -
Federal
Per- and polyfluoroalkyl substances (PFAS) Interferents List
National Institute of Standards and Technology —
A table of known interferences for per- and polyfluoroalkyl substances using mass spectrometry. -
Federal
SDNist v1.3: Temporal Map Challenge Environment
National Institute of Standards and Technology —
SDNist (v1.3) is a set of benchmark data and metrics for the evaluation of synthetic data generators on structured tabular data. This version (1.3) reproduces the... -
Federal
Data for Numisheet 2020 uniaxial tensile and tension/compression tests
National Institute of Standards and Technology —
This report describes the test equipment, process, analysis, and data file formats for the Numisheet 2020 tensile and tension/compression testing of the four... -
Federal
Observations of carbon dioxide (CO2), methane (CH4), and carbon monoxide (CO) mole fractions from the NIST Northeast Corridor urban testbed
National Institute of Standards and Technology —
March 2025 Update. Here we provide hourly observations of atmospheric carbon dioxide (CO2), methane (CH4), and (for a few sites) carbon monoxide (CO) from tower-based... -
Federal
OpenFOAM simulations of filament fusion in embedded 3D printing
National Institute of Standards and Technology —
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. However, moving the nozzle near an existing... -
Federal
NIST Fingerprint Image Quality (NFIQ) 2 Conformance Test Set
National Institute of Standards and Technology —
The images and values in this dataset are used to ensure conformance with ISO/IEC 29794-4, which may be purchased from https://www.iso.org/standard/62791.html. Values...