Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Skip to content
  • Feedback

    • 2017 NOAA/MCP Topobathy Lidar DEM: Blue Hill Bay, ME - Riegl Sensor

    Metadata Updated: March 15, 2024

    Fugro was contracted in July 2017 by the State of Maine Department of Marine Resources (SMDMR), Maine Coastal Program (MCP), and the NOAA Office for Coastal Management (OCM) to conduct an Airborne LiDAR Bathymetry (ALB) survey in the vicinity of Blue Hill Bay in Maine, and to deliver fully processed and verified hydrographic survey data.The ALB survey was conducted with the SHOALS-1000T and Riegl VQ-820-G lidar systems in a concurrent acquisition. The SHOALS system, with a high power laser, provided the better probability for deep sounding detections at a reduced point density (about 0.15 pts/m2); whilst the Riegl VQ-820-Q provided high density coverage (up to 8.5 pts/m2) but at reduced depth detection.

    This metadata record describes the bare earth, 1 meter digital elevation model (DEM) created from the topographic and bathymetric LiDAR elevations generated from data collected with the Riegl VQ-820-Q LiDAR system along Blue Hill Bay on the coastline of Maine. These files contain topographic and bathymetric LiDAR elevations generated from data collected with the Riegl VQ-820-G LiDAR system along Blue Hill Bay on the coastline of Maine. Data were collected by Fugro for NOAA OCM. The Riegl VQ-820-G system is a a bathymetric LiDAR sensor for use in coastal mapping and charting activities because the laser's ability to penetrate the water column and detect targets up to 1 time the Secchi disk depth. Survey coverage is based on a delimiting polygon provided by NOAA OCM, which envelopes the area between the 0 m contour (NAVD88) down to approximated -10 meters. Riegl VQ-820-G data were processed on Riegl RiProcess software for: point cloud generation, boresight calibration, water surface classification and modeling, refraction correction; and exported with a minimal classification LAS format v1.4 for delivery. Additional classification was performed after delivery to extract ground and bathymetric points.

    In addition to these bare earth Digital Elevation Model (DEM) data, the lidar point data that these DEM data were created from, are also available. These data are available for custom download at the link provided in the URL section of this metadata record.

    A link to custom download the bare earth DEM that was created from the concurrently collected topographic and bathymetric data (collected with the SHOALS-1000T lidar system) is provided in the URL section of this metadata record.

    Access & Use Information

    License: No license information was provided. If this work was prepared by an officer or employee of the United States government as part of that person's official duties it is considered a U.S. Government Work.

    Downloads & Resources

    Dates

    Metadata Date February 29, 2024
    Metadata Created Date November 12, 2020
    Metadata Updated Date March 15, 2024
    Reference Date(s) (publication)
    Frequency Of Update asNeeded

    Metadata Source

    Harvested from NOS OCM

    Other Data Resources

    Graphic Preview

    This graphic displays the footprint for this lidar data set.

    Additional Metadata

    Resource Type Dataset
    Metadata Date February 29, 2024
    Metadata Created Date November 12, 2020
    Metadata Updated Date March 15, 2024
    Reference Date(s) (publication)
    Responsible Party NOAA Office for Coastal Management (Point of Contact, Custodian)
    Contact Email
    Guid gov.noaa.nmfs.inport:52605
    Access Constraints Cite As: Office for Coastal Management, [Date of Access]: 2017 NOAA/MCP Topobathy Lidar DEM: Blue Hill Bay, ME - Riegl Sensor [Data Date Range], https://www.fisheries.noaa.gov/inport/item/52605., Access Constraints: None, Use Constraints: Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations., Distribution Liability: Any conclusions drawn from the analysis of this information are not the responsibility of NOAA, the Office for Coastal Management or its partners.
    Bbox East Long -68.432
    Bbox North Lat 44.313
    Bbox South Lat 44.194
    Bbox West Long -68.566
    Coupled Resource
    Frequency Of Update asNeeded
    Graphic Preview Description This graphic displays the footprint for this lidar data set.
    Graphic Preview File https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid12b/8525/supplemental/me2017_blue_hill_bay_riegl_m8525.kmz
    Graphic Preview Type KML
    Harvest Object Id 603c6729-3805-4f59-8c51-eff6813bf8cb
    Harvest Source Id c0121fd9-df15-4168-ac04-42f6e36a794d
    Harvest Source Title NOS OCM
    Licence NOAA provides no warranty, nor accepts any liability occurring from any incomplete, incorrect, or misleading data, or from any incorrect, incomplete, or misleading use of the data. It is the responsibility of the user to determine whether or not the data is suitable for the intended purpose.
    Lineage
    Metadata Language eng
    Metadata Type geospatial
    Old Spatial {"type": "Polygon", "coordinates": [[[-68.566, 44.194], [-68.432, 44.194], [-68.432, 44.313], [-68.566, 44.313], [-68.566, 44.194]]]}
    Progress completed
    Spatial Data Service Type
    Spatial Reference System
    Spatial Harvester True
    Temporal Extent Begin 2017-06-29
    Temporal Extent End 2017-07-05

    Didn't find what you're looking for? Suggest a dataset here.