Skip to main content
U.S. flag

An official website of the United States government

2016 Martin County QL2 Lidar DEM (FL)

Published by Office for Coastal Management | National Oceanic and Atmospheric Administration, Department of Commerce | Catalog Last Checked: October 06, 2026 at 10:52 PM | Dataset Last Updated: March 15, 2017 at 12:00 AM
Martin County FL QL2 Lidar Acquisition and Processing Production Task Task Order No. G14PS00574 Woolpert Order No. 76001 Contractor: Woolpert, Inc. This task is for a high resolution data set of lidar covering the total task order area of Martin County(566 square miles). The lidar data was acquired and processed under the requirements identified in this task order. The data delivered in this task order is compliant with US. Geological Survey National Geospatial Program Lidar Base Specification Version 1.2. Lidar data is a remotely sensed high resolution elevation data collected by an airborne platform. The lidar sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The lidar systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meters. The final products include classified LAS, 4 feet pixel raster DEMs of the bare-earth surface in ERDAS IMG Format, and Intensity data delivered in 5,000ft x 5,000ft tiles. Each LAS file contains lidar point information, which has been calibrated, controlled, and classified. Additional deliverables include hydrologic breakline data, bridge abutment breakline data, control data, and tile index provided as ESRI shapefile, lidar processing and survey reports in PDF format, FGDC metadata files for each data deliverable in .xml format, and LAS swath data. Please note that tile 29261 is a coastal tile and contains no lidar points. The data boundary intersects this tile and a hydro breakline was digitized based on this boundary. For this reason a hydro-flattened DEM IMG was generated. There will be no LAS 1.4 or Intensity Tiff for tile 29261. The DEM IMG file count is 768. The LAS 1.4/Intensity Tiff file count is 767. Lidar data acquired during mean low/low tide. Polygon-Z hydro breaklines contain islands as donut-holes. Ground conditions: Water at normal levels; no unusual inundation; leaf off. In addition to the bare earth Digital Elevation Models (DEMs), the lidar point data are also available. These data are available for download here: https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=6233 Breaklines created from the lidar are also available by request via email at: coastal.info@noaa.gov. The DEM and breakline products have not been reviewed by the NOAA Office for Coastal Management (OCM) and any conclusions drawn from the analysis of this information are not the responsibility of NOAA, OCM or its partners. Original contact information: Contact Org: Woolpert Phone: (937) 461-5660

Resources

5 resources available

Find Related Datasets