Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Skip to content

2013 NOAA Topographic Lidar: U.S. Virgin Islands (St. Croix, St. John, St. Thomas)

Metadata Updated: March 15, 2024

The United States Virgin Islands Topographic LiDAR project collected topographic elevation point data derived from multiple return light detection and ranging (LiDAR) measurements on the islands of St. Thomas, St. John, St. Croix and numerous smaller islands and islets in the United States Virgin Islands. The islands of St. Thomas and St. John were acquired between November 9, 2013 and November 19, 2013. The island of St. Croix was acquired between November 27, 2013 and December 10, 2013. The entire area was comprised of 88 planned flight lines and approximately 1669 flight line kilometers. LiDAR was collected at an average of 0.7 meter point spacing for all acquired project areas. The classification classes as available from the NOAA Digital Coast are: 1 (Unclassified), 2 (Bare-earth ground), 7 (Noise), 9 (Water), 10 (Ignored Ground, points close to breakline features), 16 (Overlap Water), 17 (Overlap Unclassified), 18 (Overlap Bare-earth ground). Hydro flattened breaklines and Digital Elevation Models (DEMs) are also available for download. Please see the Supplemental Information field below for links to these data sets.

Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: coastal.info@noaa.gov

Access & Use Information

License: No license information was provided. If this work was prepared by an officer or employee of the United States government as part of that person's official duties it is considered a U.S. Government Work.

Downloads & Resources

Dates

Metadata Date February 29, 2024
Metadata Created Date November 12, 2020
Metadata Updated Date March 15, 2024
Reference Date(s) August 18, 2014 (publication)
Frequency Of Update unknown

Metadata Source

Harvested from NOS OCM

Graphic Preview

This graphic shows the lidar coverage for this data set.

Additional Metadata

Resource Type Dataset
Metadata Date February 29, 2024
Metadata Created Date November 12, 2020
Metadata Updated Date March 15, 2024
Reference Date(s) August 18, 2014 (publication)
Responsible Party NOAA Office for Coastal Management (Point of Contact, Custodian)
Contact Email
Guid gov.noaa.nmfs.inport:48219
Access Constraints Cite As: Office for Coastal Management, [Date of Access]: 2013 NOAA Topographic Lidar: U.S. Virgin Islands (St. Croix, St. John, St. Thomas) [Data Date Range], https://www.fisheries.noaa.gov/inport/item/48219., Access Constraints: None, Use Constraints: None, however, users should be aware that temporal changes may have occurred since this data set was collected and that some parts of the data may no longer represent actual surface conditions. Users should not use the data for critical applications without a full awareness of its limitations., Distribution Liability: Any conclusions drawn from the analysis of this information are not the responsibility of the National Oceanic and Atmospheric Administration (NOAA), the National Ocean Service (NOS), the Office for Coastal Management (OCM) or its partners.
Bbox East Long -64.561957
Bbox North Lat 18.423828
Bbox South Lat 17.670388
Bbox West Long -65.093469
Coupled Resource
Frequency Of Update unknown
Graphic Preview Description This graphic shows the lidar coverage for this data set.
Graphic Preview File https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/3669/supplemental/usvi2013_stc_stj_stt_m3669.kmz
Graphic Preview Type kmz
Harvest Object Id 74330d61-7900-4bdf-9215-9ec594e099e8
Harvest Source Id c0121fd9-df15-4168-ac04-42f6e36a794d
Harvest Source Title NOS OCM
Licence NOAA provides no warranty, nor accepts any liability occurring from any incomplete, incorrect, or misleading data, or from any incorrect, incomplete, or misleading use of the data. It is the responsibility of the user to determine whether or not the data is suitable for the intended purpose.
Lineage
Metadata Language eng
Metadata Type geospatial
Old Spatial {"type": "Polygon", "coordinates": [[[-65.093469, 17.670388], [-64.561957, 17.670388], [-64.561957, 18.423828], [-65.093469, 18.423828], [-65.093469, 17.670388]]]}
Progress completed
Spatial Data Service Type
Spatial Reference System
Spatial Harvester True
Temporal Extent Begin 2013-11-09
Temporal Extent End 2013-12-10

Didn't find what you're looking for? Suggest a dataset here.