Search datasets
-
Corrosion is defined as the deterioration of a material due to chemical reactions with its environment. Understanding corrosion, and corrosion rates, is necessary to ensure that the design of...
Search relevance: 1.00 | Views last month: 96 | Catalog Last Checked: September 10, 2026 at 05:51 PM -
Between 1922 and 1940, the National Bureau of Standards (NBS) conducted a long-term investigation into the corrosion of bare steel and iron, pipes buried underground at 47 sites representing...
Search relevance: 1.00 | Views last month: 12 | Catalog Last Checked: September 10, 2026 at 05:51 PM -
S&T Project ID 19085 Final Report No. ST-2021-19085-4: Analysis of 6061 Aluminum Cold Spray Material
This final report is an analysis of 6061 aluminum cold spray material and its suitability for Bureau of Reclamation (Reclamation) purposes. Cold spray Al 6061 has significantly poorer mechanical...
Search relevance: 1.00 | Views last month: 7 | Catalog Last Checked: September 10, 2026 at 07:39 PM -
Transportation of damaged, defective, or recalled (DDR) lithium-ion batteries (LIBs) of is an important emerging issue as the use of electronic vehicles (EVs) and other LIB based items...
Search relevance: 1.00 | Views last month: 7 | Catalog Last Checked: September 10, 2026 at 07:02 PM -
The data provided in this submission contain the analysis input files and result post-processing spreadsheets and scripts to perform the CFD analysis, load case development, strength FEA, fatigue...
Search relevance: 1.00 | Views last month: 4 | Catalog Last Checked: September 10, 2026 at 05:53 PM -
The objective of this field test is to validate several technologies for non-invasive well integrity assessment using existing wells with a known completion. The tests were made at the Cymric oil...
Search relevance: 1.00 | Views last month: 4 | Catalog Last Checked: September 10, 2026 at 05:50 PM -
Data set associated with manuscript Applying Microelectrodes to Investigate Aged Ductile Iron and Copper Coupon Reactivity during Free Chlorine Application. This dataset is associated with the...
Search relevance: 1.00 | Views last month: 3 | Catalog Last Checked: September 10, 2026 at 07:00 PM -
This dataset contains data recordings used to generate the figures included in the Post Access Report for the TEAMER project "Biofouling and Corrosion Study for a Novel Linear Guided Wave Energy...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: September 10, 2026 at 05:52 PM -
Supporting data for Additive Manufacturing Project: mechanical test data (tensile, charpy, hardness), density
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: September 10, 2026 at 07:39 PM -
The dataset was used to develop the tables and figures in the manuscript. This dataset is associated with the following publication: Williams, D., C. Parrett, M. Schock, C. Muhlen, P. Donnelly,...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: September 10, 2026 at 06:55 PM -
The open circuit potential of cold-rolled and additively manufactured (AM) 316L stainless steel was measured. The AM parts underwent a variety of post-processing procedures including grinding and...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: September 10, 2026 at 07:36 PM -
This study evaluated reuse of lime softening sludge, generated from drinking water treatment utilities, as an environmental sorbent for capturing SO2 and heavy metals in wet scrubbers of...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: September 10, 2026 at 06:56 PM -
This final report is an analysis of Powder Bed Fusion (PBF) stainless steel 316L and its suitability for Bureau of Reclamation (Reclamation) purposes. An open cube was printed using PBF additive...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: September 10, 2026 at 07:39 PM -
Csv file for all measured anode current outputs during the testing phase of the tank ribbon anode cathodic protection research.
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: September 10, 2026 at 07:27 PM -
This project undertook a collaboration with Oak Ridge National Laboratory to determine the feasibility and cost and to demonstrate the efficacy of additively manufactured replacements for selected...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: September 10, 2026 at 07:39 PM -
For the model calculation we applied EM3D using completion diagram of CaMI site and a background resistivity consistent with the borehole logs. It was also important to use the accurate position...
Search relevance: 1.00 | Views last month: 1 | Catalog Last Checked: September 10, 2026 at 05:50 PM -
Csv file for all measured checks during the building phase of the tank ribbon anode cathodic protection research. Checks include surface profile of the tank, environmentals during coatings...
Search relevance: 1.00 | Views last month: 1 | Catalog Last Checked: September 10, 2026 at 07:27 PM -
Csv file for all measured water conductivity values during the design phase of the tank ribbon anode cathodic protection research.
Search relevance: 1.00 | Views last month: 1 | Catalog Last Checked: September 10, 2026 at 07:27 PM -
Data shown in the figures presented in the manuscript. This dataset is associated with the following publication: Lee, W.H., D. Wahman, D. Lytle, J. Pressman, and J. Chung. Microelectrode...
Search relevance: 1.00 | Views last month: 1 | Catalog Last Checked: September 10, 2026 at 06:59 PM -
Potential vs. time data for 50 hours of run time for unpolished (as-received) cold rolled 316L stainless steel, polished cold-rolled 316L stainless steel, powder bed fusion printed (additively...
Search relevance: 1.00 | Views last month: 1 | Catalog Last Checked: September 10, 2026 at 07:36 PM
