Search datasets
-
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a non-standard hot isostatic...
Search relevance: 1.00 | Views last month: 27 | Catalog Last Checked: August 03, 2026 at 03:52 AM -
Rheology data obtained from flow loop tests, performed using different lost circulation materials (LCM) to study their effect on fluid rheology and wellbore hydraulics. The sealing performance of...
Search relevance: 1.00 | Views last month: 12 | Catalog Last Checked: August 03, 2026 at 01:01 AM -
Digital light processing (DLP) vat photopolymerization (VP) additive manufacturing (AM) uses patterned UV light to selectively cure a liquid photopolymer into a solid layer. Subsequent layers are...
Search relevance: 1.00 | Views last month: 5 | Catalog Last Checked: August 03, 2026 at 03:51 AM -
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. This repository includes Python code for analyzing and managing images and...
Search relevance: 1.00 | Views last month: 4 | Catalog Last Checked: August 03, 2026 at 03:52 AM -
This final report is an analysis of Powder Bed Fusion (PBF) stainless steel 316L and its suitability for Bureau of Reclamation (Reclamation) purposes. An open cube was printed using PBF additive...
Search relevance: 1.00 | Views last month: 4 | Catalog Last Checked: August 01, 2026 at 05:34 AM -
Three-dimensional (3D) food printing holds the potential to help reduce food waste by precise portion control and use of materials that are produced in excess or are otherwise discarded. This...
Search relevance: 1.00 | Views last month: 3 | Catalog Last Checked: August 01, 2026 at 04:51 AM -
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. Using OpenFOAM, we simulated the extrusion of filaments and droplets into a...
Search relevance: 1.00 | Views last month: 3 | Catalog Last Checked: August 03, 2026 at 03:51 AM -
This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-miniature tensile specimens were...
Search relevance: 1.00 | Views last month: 3 | Catalog Last Checked: August 03, 2026 at 03:52 AM -
These images, videos, and tables show experimental data, where single lines of viscoelastic inks were extruded into moving viscoelastic support baths. Lines were printed at varying angles relative...
Search relevance: 1.00 | Views last month: 3 | Catalog Last Checked: August 03, 2026 at 03:51 AM -
Supporting data for Additive Manufacturing Project: mechanical test data (tensile, charpy, hardness), density
Search relevance: 1.00 | Views last month: 3 | Catalog Last Checked: August 01, 2026 at 05:34 AM -
This project undertook a collaboration with Oak Ridge National Laboratory to determine the feasibility and cost and to demonstrate the efficacy of additively manufactured replacements for selected...
Search relevance: 1.00 | Views last month: 3 | Catalog Last Checked: August 01, 2026 at 05:34 AM -
S&T Project ID 19085 Final Report No. ST-2021-19085-4: Analysis of 6061 Aluminum Cold Spray Material
This final report is an analysis of 6061 aluminum cold spray material and its suitability for Bureau of Reclamation (Reclamation) purposes. Cold spray Al 6061 has significantly poorer mechanical...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: August 01, 2026 at 05:34 AM -
The data presented includes the total elemental analysis, via ICP-MS) of aerosol emissions from 3D printer of thermoplastic polymers. This dataset is associated with the following...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: August 03, 2026 at 12:45 AM -
The data set contains the details on the thermal degradation that takes place during 3D printing of acrylonitrile butadiene styrene both with and without carbon nanotubes. Volatile organic...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: August 03, 2026 at 12:44 AM -
EPA employee associated with this research has retired. Supplemental material for this article contains additional information about the data, but for additional information on the data please...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: August 03, 2026 at 12:49 AM -
Data used to generate Table 2 and 3 in the manuscript Metal compositions of particle emissions from material extrusion 3D printing: Emission sources and indoor exposure modeling,...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: August 03, 2026 at 12:48 AM -
Raw data, software, standard operating procedure, and computer aided design files for the NIST-led publication "Results of an Interlaboratory Study on the Working Curve in Vat Photopolymerization...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: August 03, 2026 at 03:52 AM -
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. Using OpenFOAM, we simulated the extrusion of filaments and droplets into a...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: August 03, 2026 at 03:52 AM -
Temperature profiles of acrylonitrile butadiene styrene (ABS) filament during material extrusion additive manufacturing. Printing temperature and velocities cover the full "printable" range of the...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: August 03, 2026 at 03:51 AM -
The AM EoL - Material Flow Analysis and GREENSCOPE_11-25-23_TradeOff.xlsx file contains the data supporting the GREENSCOPE sustainability assessment associated with the management of end-of-life...
Search relevance: 1.00 | Views last month: 2 | Catalog Last Checked: August 03, 2026 at 12:52 AM
