-
TEAMER: Laboratory Upgrade Point Absorber v2 CAD Model and Bill of Materials
The Laboratory Upgrade Point Absorber (LUPA) is an open-source wave energy converter designed and tested by Oregon State University. The computer-aided design (CAD) files are... -
PoroTomo - Distributed Temperature Sensing (DTS) Measurements made in Brady Observation Well 56-1
This submission is a follow-up to Distributed Temperature Sensing (DTS) measurements made in Brady observation well 56-1 during the PoroTomo field experiment conducted in March,... -
Underwater Mapping Results for Seabotix vLBV300 Vehicle with Tritech Gemini 720i Imaging Sonar near Newport, OR
This document presents results from tests to demonstrate underwater mapping capabilities of an underwater vehicle in conditions typically found in marine renewable energy... -
Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging - Software and Data
Software and testing data from the OH Hinsdale Wave lab for DOE-funded project on Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging.... -
Pacific Marine Energy Center benthic physical conditions, macrofauna, and groundfish abundances
From 2010 to 2015, box core grabs were collected at permanent stations around the Pacific Marine Energy Center - North Energy Test Site (PMEC-NETS) off Newport, Oregon. At each... -
Laboratory Upgrade Point Absorber (LUPA) CAD Files
The Laboratory Upgrade Point Absorber (LUPA) is an open-source wave energy converter designed and tested by Oregon State University. The computer-aided design (CAD) files are... -
Laboratory Upgrade Point Absorber WEC-Sim Model with MoorDyn Moorings
This dataset includes a WEC-Sim and MoorDyn model of the Laboratory Upgrade Point Absorber (LUPA). LUPA is an open-source wave energy converter designed and tested by Oregon... -
TEAMER: OSU X Hinsdale & Sandia - LUPA System Identification
This submission is part of a TEAMER testing campaign through RFTS 7 at the O.H. Hinsdale Wave Research Laboratory in Corvallis, Oregon. This testing was conducted by Oregon... -
PacWave Site Observations
This data submission contains raw and near-real-time updated data from FLOATr (Fixed Location Ocean and Atmosphere Tracking) buoys and Sofar Spotter wave buoys at sites in the... -
Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging - Year 3 Software and Data
This dataset contains software, sensor data, and experimental recordings generated during Year 3 of a DOE-funded project focused on the co-design of marine energy converters and... -
ALFA Shared Autonomy Manipulation Data with a Seabotix vLBV300
This report outlines marine field demonstrations for manipulation tasks with a semi-Autonomous Underwater Vehicle (sAUV). The vehicle is built off a Seabotix vLBV300 platform... -
BOBr Raw Breaking Wave Data, Agate Beach, OR
Raw data from the BOBr (Buoy to Observe Breaking) wave measurement buoy. Data was recorded off the coast of Newport, OR at Agate Beach, in the surf zone. -
Laboratory Experiments for Highly Nonlinear WEC-Wave Conditions
This document describes the experiments carried out in December 2019 and February-March 2020 in the Directional Wave Basin at the O.H. Hinsdale Wave Research Laboratory, Oregon... -
BOBr Processed Breaking Wave Data, Agate Beach, OR
This data was recorded by the BOBr (Buoy to Observe Breaking) off the coast of Newport, OR at Agate Beach in the surf zone. The data was recorded by a 9dof inertial measurement... -
ALFA Station Keeping Results for Seabotix vLBV300 Underwater Vehicle near Newport, OR
This data set presents results testing the station keeping abilities of a tethered Seabotix vLBV300 underwater vehicle equipped with an inertial navigation system. These results...