-
GC-MS Screening Data for Instrument Optimization
The objective of this example case was to maximize peak height and minimize peak width of 11 iodinated standards analyzed using gas chromatography-mass spectrometry (GC-MS).... -
Load Cap & Dil HNO3 Rinse of DGA Resin for Recov of TPEs & REEs from M-18A Targets
"Loading Capacity and Dilute Nitric Acid Rinse of Diglycolamide Resin for the Recovery of Transplutonium and Rare Earth Elements from Mark-18A Targets"... -
Real-time infrared spectroscopy with blind source separation for nuclear waste process monitoring
On-line infrared absorbance spectroscopy enables rapid measurement of solution-phase molecular species. Many spectra-to-concentration models exist for spectral data, with some... -
Catalytic Effects of Silver in Iodine Reactors for Dissolved Used Nuclear Fuel
The dissolution of used nuclear fuel generates a variety of off-gasses including flammable hydrogen and other species that are a concern for environmental release. The H-Canyon... -
On the microstructure evolution of AA6061 with pulsed laser powder bed fusion
"This study uncovers new opportunities for microstructure engineering of AA6061 using pulsed lasers in powder bed fusion. Experimental analysis reveals that pulsed lasers allow... -
GC-MS Surface Response Data for Instrument Optimization
The objective of this example case was to maximize peak height and minimize peak width of 11 iodinated standards analyzed using gas chromatography-mass spectrometry (GC-MS)....