{"@type": "dcat:Dataset", "DOI": "10.15121/1777170", "accessLevel": "public", "bureauCode": ["019:20"], "contactPoint": {"@type": "vcard:Contact", "fn": "John McLennan", "hasEmail": "mailto:jmclennan@egi.utah.edu"}, "dataQuality": true, "description": "This dataset consists of drilling data (Pason data spreadsheets, daily reports, days v. depth, mud logs), Schlumberger logs (FMI, shear anisotropy analysis, memory, sonic, array induction/spectral density/dual spaced neutron/gamma ray/caliper, spectral GR/temperature, and Gardner density correlation), and an end of well report (EOWR) for Utah FORGE well 56-32. This is a vertical well that will be used for seismic monitoring. It was drilled between February 7th and February 21st 2021 to a depth of 9,145 feet. More information about this well can be found at: https://utahforge.com/2021/02/09/drilling-progress-of-well-56-32/ (linked below)", "distribution": [{"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/56-32%2010sec%20data%2027029986.csv", "description": "Pason data from Utah FORGE Well 56-32 stored at 10 second time intervals. This data contains drilling information through time such as hole depth, bit depth, rate of penetration, weight on bit, rotary rpm, etc. Less drilling parameters are included in this file than what is included in the 1 second interval data.", "format": "csv", "mediaType": "text/csv", "title": "56-32 Pason Reduced Data at 10 sec Intervals.csv"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/56-32%2010sec%20data%2027029986_standard.csv", "description": "This file is a Drilling Data Standard auto-generated copy. Pason data from Utah FORGE Well 56-32 stored at 10 second time intervals. This data contains drilling information through time such as hole depth, bit depth, rate of penetration, weight on bit, rotary rpm, etc. Less drilling parameters are included in this file than what is included in the 1 second interval data.", "format": "csv", "mediaType": "text/csv", "title": "Standard 56-32 Pason Reduced Data at 10 sec Intervals.csv"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/56-32%201sec%20data%2027029986.csv", "description": "Pason data from Utah FORGE Well 56-32 stored at 1 second time intervals. This data contains drilling information through time such as hole depth, bit depth, rate of penetration, weight on bit, rotary rpm, etc. Less drilling parameters are included in this file than what is included in the full Pason dataset at 1 second intervals.", "format": "csv", "mediaType": "text/csv", "title": "56-32 Pason Reduced Data at 1 sec Intervals.csv"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/56-32%201sec%20data%2027029986_standard.csv", "description": "This file is a Drilling Data Standard auto-generated copy. Pason data from Utah FORGE Well 56-32 stored at 1 second time intervals. This data contains drilling information through time such as hole depth, bit depth, rate of penetration, weight on bit, rotary rpm, etc. Less drilling parameters are included in this file than what is included in the full Pason dataset at 1 second intervals.", "format": "csv", "mediaType": "text/csv", "title": "Standard 56-32 Pason Reduced Data at 1 sec Intervals.csv"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/56-32%20Caliper%20Log.zip", "description": "LAS and pdf versions of the 56-32 Schlumberger caliper log", "format": "zip", "mediaType": "application/zip", "title": "56-32 Caliper Log.zip"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/56-32%20Cement%20Bond.zip", "description": "This is a Schlumberger concrete bond log (CBL) run on well 56-32. It was taken on August 17th, 2021. This dataset also includes mud temperature and gamma logs in .LAS and graphic PDF files.", "format": "zip", "mediaType": "application/zip", "title": "56-32 Concrete Bond Log.zip"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/56-32%20Daily%20Drilling%20Reports.zip", "description": "This dataset contains the daily drilling reports for Utah FORGE well 56-32.", "format": "zip", "mediaType": "application/zip", "title": "56-32 Daily Drilling Reports.zip"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/56-32%20Daily%20Mud%20Logs.zip", "description": "This dataset contains the daily and composite mud logs for Utah FORGE well 56-32.", "format": "zip", "mediaType": "application/zip", "title": "56-32 Daily Mud Logs.zip"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/56-32%20DaysVsDepth%20Reports.zip", "description": "This dataset contains the days v. depth logs for Utah FORGE well 56-32.", "format": "zip", "mediaType": "application/zip", "title": "56-32 Days vs Depth Reports.zip"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/56-32%20EOWR%20-%20Final%2022%20July%202021.pdf", "description": "End of Well Report for Utah FORGE Seismic Monitoring Well 56-32", "format": "pdf", "mediaType": "application/pdf", "title": "56-32 End of Well Report.pdf"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/56-32%20FMI%20reinterpretation_Handwerger%202022.zip", "description": "Consists of reinterpreted FMI data for well 56-32. The zip file contains PDF logs, an Excel spreadsheet with fracture locations, and a detailed report. Data was reinterpreted by David Handwerger.", "format": "zip", "mediaType": "application/zip", "title": "56-32 FMI Reinterpretation Handwerger 2022.zip"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/56-32%20XRD%20Results_v2.xlsx", "description": "This is the X-ray diffraction (XRD) results are for 69 samples taken from well 56-32 from depths between 3050 and 9130 feet. Additional information about the XRD is found in the Excel spreadsheet.", "format": "xlsx", "mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", "title": "56-32 XRD Results.xlsx"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/56-32%20drill%20bit%20BHA%20data.zip", "description": "This archive contains drill bit and bottom hole assembly spec sheets and data and motor run data.", "format": "zip", "mediaType": "application/zip", "title": "56-32 Drill Bit  BHA Data.zip"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/56-32_Pason_Archive.zip", "description": "This is an archive of the full Pason dataset from the drilling of Utah FORGE observation well 56-32. It consists of multiple .csv spreadsheet files and the data is stored at 1 s intervals. Pason data is a record of detailed drilling information captured through time. More information about Pason can been seen at: https://www.pason.com/solutions/technology/ ", "format": "zip", "mediaType": "application/zip", "title": "56-32 Pason Full Dataset at 1 sec Intervals.zip"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/Schlumberger_56-32.zip", "description": "This dataset contains the Schlumberger logs for Utah FORGE well 56-32. Please note that Schlumberger TBFMI log .las files are designed for use only with their Techlog software. More information about this software can be found at: https://www.software.slb.com/products/techlog.", "format": "zip", "mediaType": "application/zip", "title": "56-32 Schlumberger Logs.zip"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/University%20of%20Utah%20FORGE%2056-32%20Final%20Compiled%20Log.pdf", "description": "Final compiled mud log for Utah FORGE Well 56-32", "format": "pdf", "mediaType": "application/pdf", "title": "56-32 Final Compiled Mud Log.pdf"}, {"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1295/Well%2056-32%20trajectory%20survey%20data.zip", "description": "This archive contains the original directional survey for Utah FORGE observation well 56-32 as well as a .csv file containing UTM zone 12, NAD83 coordinates calculated from the survey data. There is also a readme file with additionally information. Note that all depth measurements in well_survey_final.csv are in feet.", "format": "zip", "mediaType": "application/zip", "title": "56-32 Trajectory Survey Data.zip"}, {"@type": "dcat:Distribution", "accessURL": "https://utahforge.com/2021/03/25/drilling-of-well-56-32/", "description": "Link to Utah FORGE drilling progress web page for well 56-32", "format": "HTML", "mediaType": "text/html", "title": "56-32 Additional Info"}], "identifier": "https://data.openei.org/submissions/7413", "issued": "2021-03-19T06:00:00Z", "keyword": ["EGS", "EOWR", "FMI", "FORGE", "GR", "Gardner density", "Pason", "Schlumberger", "Utah FORGE", "Utah FORGE well 56-32", "Well 56-32", "Well 56-32 Data", "Well 56-32 Pason data", "Well 56-32 Schlumberger logs", "Well 56-32 daily drilling reports", "Well 56-32 logs", "array induction", "caliper", "daily drilling report", "day vs depth", "density", "drill bit BHA", "drilling", "dual spaced", "end of well report", "energy", "gamma", "geothermal", "logging", "logs", "memory", "mud log", "neutron", "shear anisotropy", "sonic", "spectral", "spectral density", "temperature", "well data", "well log"], "landingPage": "https://gdr.openei.org/submissions/1295", "license": "https://creativecommons.org/licenses/by/4.0/", "modified": "2022-10-31T16:52:14Z", "programCode": ["019:006"], "projectLead": "Lauren Boyd", "projectNumber": "EE0007080", "projectTitle": "Utah FORGE", "publisher": {"@type": "org:Organization", "name": "Energy and Geoscience Institute at the University of Utah"}, "spatial": "{\"type\":\"Polygon\",\"coordinates\":[[[-112.916367,38.483935],[-112.879748,38.483935],[-112.879748,38.5148],[-112.916367,38.5148],[-112.916367,38.483935]]]}", "title": "Utah FORGE: Well 56-32 Drilling Data and Logs"}