{"@type": "dcat:Dataset", "DOI": "10.15473/1643941", "accessLevel": "public", "bureauCode": ["019:20"], "contactPoint": {"@type": "vcard:Contact", "fn": "Kevin Koudela", "hasEmail": "mailto:klk121@arl.psu.edu"}, "dataQuality": true, "description": "The primary objective of this project is to develop a three-blade MHK rotor with low manufacturing and maintenance costs. The proposed program will design, fabricate and test a novel half-scale low cost, net shape fabricated single piece three-blade MHK rotor with integrated health management technology to demonstrate significant Capital Expenditures (CAPEX) and Operational Expenditures (OPEX) cost reductions due to the novel design and manufacturing process. \nThe proposed project is divided into three major tasks:\n\nTask 1: Single Piece Three-blade Kinetic Hydropower System (KHPS) Rotor Full-Scale and Half-Scale Design; \nTask 2: Composite Manufacturing Trials and Half-Scale Prototype Rotor Fabrication; and \nTask 3: Material Characterization and Half-Scale Prototype Test and Evaluation.\n\nThese three tasks include design and analysis of full-scale and half-scale three-blade rotor prototypes using computational fluid dynamics (CFD) and finite-element analysis (FEA), demonstration of a novel half-scale net shape fabrication process, determination of a fatigue threshold composite strain allowable, three-blade rotor mold design, manufacture of half-scale rotor clam shell mold, three-blade rotor test fixture design and fabrication, development of final manufacturing and test plans, manufacture of the half-scale net shape composite single blade and three-blade prototypes, and test and evaluation of the half-scale rotor.", "distribution": [{"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/10.1%20CAPEX%20OPEX%20Estimate%202.xlsx", "description": "Second of three estimates of capital and operational expenditures", "format": "xlsx", "mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", "title": "10.1 CAPEX OPEX Second Estimate.xlsx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/10.2%20Component%20Design%20Report.docx", "description": "Component Design Report including flow visualization, CFD and FE analyses, half-scale 3-blade rotor design and fabrication, fatigue test analyses, and experimental results", "format": "docx", "mediaType": "application/vnd.openxmlformats-officedocument.wordprocessingml.document", "title": "10.2 Component Design Report.docx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/10.3%20Comparison%20of%20Measured%20abd%20Predicted%20%20QS%203-Blade%20Rotor%20Test%20Data.xlsx", "description": "Comparison of Predicted and Actual Strains", "format": "xlsx", "mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", "title": "10.3 Comparison of Measured and Predicted QS 3-Blade Rotor Test Data.xlsx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/10.4%20Final%20Test%20Report.docx", "description": "Final Test Report including quasi-static coupon testing, in-plane coupon fatigue, and sub-scale rotor-blade fatigue", "format": "docx", "mediaType": "application/vnd.openxmlformats-officedocument.wordprocessingml.document", "title": "10.4 Final Test Report.docx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/10.5%20Final%20CAPEX%20OPEX.xlsx", "description": "Third of three estimates of capital and operational expenditures", "format": "xlsx", "mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", "title": "10.5 Final CAPEX OPEX.xlsx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/10.6%20Actual%20Cost%20to%20Fab%20Single%20Blade%203-Blade%20Rotor%20and%20Prototypes.xlsx", "description": "Costs for Single Blade, 3-Blade Rotor and Additional Prototypes", "format": "xlsx", "mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", "title": "10.6 Actual Cost to Fab Single Blade 3-Blade Rotor and Prototypes.xlsx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/10.7%20Updated%20Metrics_Table.xlsx", "description": "Updated Metrics Table", "format": "xlsx", "mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", "title": "10.7 Updated Metrics Table.xlsx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/7.1%20U_surf.zip", "description": "U_surf archive containing files for CFD steady-state and transient simulations", "format": "zip", "mediaType": "application/zip", "title": "7.1 CFD Simulation Data.zip"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/8.1%20Full-scale%20Rotor%20Design%20FEA%20Assessment.pptx", "description": "Rotor Design Assessment with initial FE model, FEA of single full-scale blade, rotor FE model assembly, and principal strains and stress", "format": "pptx", "mediaType": "application/vnd.openxmlformats-officedocument.presentationml.presentation", "title": "8.1 Full-scale Rotor Design FEA Assessment.pptx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/8.2%20Full_scale_3_Blade_Rotor%20CAD%20Model.stp", "description": "CAD model of three blade rotor assembly", "format": "stp", "mediaType": "application/octet-stream", "title": "8.2 Full-Scale 3-Blade Rotor CAD Model.stp"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/8.3%20QS%20Single_Blade_CAD_Solid_model.stp", "description": "Solid CAD model of quarter-scale single blade rotor", "format": "stp", "mediaType": "application/octet-stream", "title": "8.3 QS Single Blade CAD.stp"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/8.4%20Geometry%20inspection%20of%20Q.S.%20Single%20Blade%20clam-shell%20tool.xlsx", "description": "Geometry inspection of the quarter scale single-blade clam shell tool", "format": "xlsx", "mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", "title": "8.4 Geometry Inspection of QS Single Blade Clam-Shell Tool.xlsx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/8.5%20as_fabricated_single_blade.zip", "description": "Images of as-fabricated single blade rotor", "format": "zip", "mediaType": "application/zip", "title": "8.5 As-Fabricated Single Blade.zip"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/8.6%20Geometry%20inspection%20results%20of%20as%20fab%20single%20blade.xlsx", "description": "Geometric inspection results of the as-fabricated single blade rotor", "format": "xlsx", "mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", "title": "8.6 Geometry Inspection Results of As-Fab Single Blade.xlsx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/8.7%2010M%20Cycle%20Threshold%20Fatigue%20Test%20Data.xlsx", "description": "Quarter-Scale 3-blade composite fatigue test results", "format": "xlsx", "mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", "title": "8.7 10M Cycle Threshold Fatigue Test Data.xlsx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/8.8%20Single_blade_fabrication_demo.pptx", "description": "Single-blade 1/2 scale fabrication demonstration from ply development, mold construction, curing, and de-molding", "format": "pptx", "mediaType": "application/vnd.openxmlformats-officedocument.presentationml.presentation", "title": "8.8 Single Blade Fabrication Demo.pptx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/9.1%20CAPEX%20OPEX%20First%20Estimate.xlsx", "description": "First of three estimates of capital and operational expenditures", "format": "xlsx", "mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", "title": "9.1 CAPEX OPEX First Estimate.xlsx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/9.2%20Interim%20Design%20Report.docx", "description": "Interim design report including CFD steady state and transient solutions and 3-blade rotor design and analysis", "format": "docx", "mediaType": "application/vnd.openxmlformats-officedocument.wordprocessingml.document", "title": "9.2 Interim Design Report.docx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/9.3%20Geometric%20inspection%20of%20QS%203-blade%20clam-shell%20mold.xlsx", "description": "Inspection of the QS 3-Blade Clam-Shell Mold", "format": "xlsx", "mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", "title": "9.3 Geometric inspection of QS 3-Blade Clam-Shell Mold.xlsx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/9.4%20QS%20Fixture%20Design%20and%20Instrumentation%20Suite.pptx", "description": "Test Fixture and Instrumentation for the QS Three Blade Composite Rotor", "format": "pptx", "mediaType": "application/vnd.openxmlformats-officedocument.presentationml.presentation", "title": "9.4 QS Fixture Design and Instrumentation Suite.pptx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/9.5%20Testing%20and%20Validation%20Plan.docx", "description": "Testing and Validation Plan describing static and fatigue test setup and procedures", "format": "docx", "mediaType": "application/vnd.openxmlformats-officedocument.wordprocessingml.document", "title": "9.5 Testing and Validation Plan.docx"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/9.6%20Images%20QS%203-blade_rotor.zip", "description": "Images of Quarter Scale 3-blade rotor before and after removal of slight mold flash", "format": "zip", "mediaType": "application/zip", "title": "9.6 Images QS 3-Blade Rotor.zip"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/9.7%20QS%203-blade%20Rotor%20Test%20Fixture.stp", "description": "QS 3-Blade Rotor Test Fixture CAD Model", "format": "stp", "mediaType": "application/octet-stream", "title": "9.7 QS 3-blade Rotor Test Fixture.stp"}, {"@type": "dcat:Distribution", "accessURL": "https://mhkdr.openei.org/files/324/9.8%20Image%20of%20As-Fab%20QS%20Test%20Fixture.zip", "description": "Images of fully-fixtured quarter-scale as-fabricated rotor test assembly and fixture plate fastened to Instron servo-hydraulic test frame", "format": "zip", "mediaType": "application/zip", "title": "9.8 Image of As-Fab QS Test Fixture.zip"}], "identifier": "https://data.openei.org/submissions/7978", "issued": "2016-02-09T07:00:00Z", "keyword": ["ADV", "CAD", "CAPEX", "CEC", "CFD", "Composite Materials", "FAST", "FEA", "Gen5d", "Hydrokinetic", "KHPS", "Kinetic Hydropower System", "Net Shape Fabrication", "OPEX", "OVER-REL", "RITE", "Test and Evaluation", "Threshold Fatigue", "VP", "Verdant Power", "as-fabricated", "axial flow turbine", "economics", "fabrication", "fatigue test", "flow", "health management", "modeling", "rotor", "simulation", "steady-state", "strain", "stress", "three-blade", "transient", "visualization"], "landingPage": "https://mhkdr.openei.org/submissions/324", "license": "https://creativecommons.org/licenses/by/4.0/", "modified": "2021-05-17T16:25:03Z", "programCode": ["019:009"], "projectLead": "Yana Shininger", "projectNumber": "EE0007176", "projectTitle": "EE0007176.000 Net Shape Fabricated Low Cost MHK Pass-Through the Hub Turbine Blades with Integrated Health Management Technology", "publisher": {"@type": "org:Organization", "name": "ARL Penn State"}, "spatial": "{\"type\":\"Polygon\",\"coordinates\":[[[-77.84381774868966,40.79125515108709],[-77.84381774868966,40.79125515108709],[-77.84381774868966,40.79125515108709],[-77.84381774868966,40.79125515108709],[-77.84381774868966,40.79125515108709]]]}", "title": "Net Shape Fabricated Low Cost MHK Pass-Through the Hub Turbine Blades with Integrated Health Management Technology"}