FSA 10:1 NAIP Imagery m_3808217_ne_17_1_20150821_20151023 3.75 x 3.75 minute JPEG2000 from The National Map


Identification Information:
Citation:
Citation Information:
Originator: USDA-FSA-APFO Aerial Photography Field Office
Publication Date: 20151117
Title: FSA 10:1 NAIP Imagery m_3808217_ne_17_1_20150821_20151023 3.75 x 3.75 minute JPEG2000 from The National Map
Geospatial Data Presentation Form: remote-sensing image
Publication Information:
Publication Place: Salt Lake City, Utah
Publisher: USDA-FSA-APFO Aerial Photography Field Office
Larger Work Citation:
Citation Information:
Originator: U.S. Geological Survey
Publication Date: 2016
Title: USDA National Agriculture Imagery Program (NAIP)
Online Linkage: https://www.sciencebase.gov/catalog/item/51355312e4b0e1603e4fed62
Description:
Abstract: This data set contains imagery from the National Agriculture Imagery Program (NAIP). The NAIP program is administered by USDA FSA and has been established to support two main FSA strategic goals centered on agricultural production. These are, increase stewardship of America's natural resources while enhancing the environment, and to ensure commodities are procured and distributed effectively and efficiently to increase food security. The NAIP program supports these goals by acquiring and providing ortho imagery that has been collected during the agricultural growing season in the U.S. The NAIP ortho imagery is tailored to meet FSA requirements and is a fundamental tool used to support FSA farm and conservation programs. Ortho imagery provides an effective, intuitive means of communication about farm program administration between FSA and stakeholders. New technology and innovation is identified by fostering and maintaining a relationship with vendors and government partners, and by keeping pace with the broader geospatial community. As a result of these efforts the NAIP program provides three main products: DOQQ tiles, Compressed County Mosaics (CCM), and Seamline shape files The Contract specifications for NAIP imagery have changed over time reflecting agency requirements and improving technologies. These changes include image resolution, horizontal accuracy, coverage area, and number of bands. In general, flying seasons are established by FSA and are targeted for peak crop growing conditions. The NAIP acquisition cycle is based on a minimum 3 year refresh of base ortho imagery. The tiling format of the NAIP imagery is based on a 3.75' x 3.75' quarter quadrangle with a 300 pixel buffer on all four sides. NAIP quarter quads are formatted to the UTM coordinate system using the North American Datum of 1983. NAIP imagery may contain as much as 10% cloud cover per tile.
Purpose: NAIP imagery is available for distribution within 60 days of the end of a flying season and is intended to provide current information of agricultural conditions in support of USDA farm programs. For USDA Farm Service Agency, the 1 meter and 1/2 meter GSD product provides an ortho image base for Common Land Unit boundaries and other data sets. The 1 meter and 1/2 meter NAIP imagery is generally acquired in projects covering full states in cooperation with state government and other federal agencies that use the imagery for a variety of purposes including land use planning and natural resource assessment. The NAIP is also used for disaster response. While suitable for a variety of uses, prior to 2007 the 2 meter GSD NAIP imagery was primarily intended to assess "crop condition and compliance" to USDA farm program conditions. The 2 meter imagery was generally acquired only for agricultural areas within state projects.
Supplemental Information: {"gdaId" : 8419029}
Time Period of Content:
Time Period Information:
Single Date/Time:
Calendar Date: 20150821
Currentness Reference: Ground Condition
Status:
Progress: Complete
Maintenance and Update Frequency: Irregular
Spatial Domain:
Bounding Coordinates:
West Bounding Coordinate: -82.9375
East Bounding Coordinate: -82.8750
North Bounding Coordinate: 38.7500
South Bounding Coordinate: 38.6875
Keywords:
Theme:
Theme Keyword Thesaurus: The National Map Type Thesaurus
Theme Keyword: Downloadable Data
Theme:
Theme Keyword Thesaurus: The National Map Theme Thesaurus
Theme Keyword: Orthoimagery
Theme:
Theme Keyword Thesaurus: The National Map Collection Thesaurus
Theme Keyword: USDA National Agriculture Imagery Program (NAIP)
Theme:
Theme Keyword Thesaurus: The National Map Product Extent Thesaurus
Theme Keyword: 3.75 x 3.75 minute
Theme:
Theme Keyword Thesaurus: The National Map Product Format Thesaurus
Theme Keyword: JPEG2000
Theme:
Theme Keyword Thesaurus: None
Theme Keyword: farming
Theme Keyword: Digital Ortho rectified Image
Theme Keyword: Ortho Rectification
Theme Keyword: Quarter Quadrangle
Theme Keyword: NAIP
Theme Keyword: Aerial Compliance
Theme Keyword: Compliance
Place:
Place Keyword Thesaurus: Geographic Names Information System
Place Keyword: OH
Place Keyword: Scioto
Place Keyword: 39145
Place Keyword: OH145
Place Keyword: SCIOTO CO OH FSA
Place Keyword: 3808217
Place Keyword: PORTSMOUTH, NE
Place Keyword: PORTSMOUTH
Access Constraints: There are no limitations for access.
Use Constraints: None. The USDA-FSA Aerial Photography Field office asks to be credited in derived products.
Point of Contact:
Contact Information:
Contact Organization Primary:
Contact Organization: Aerial Photography Field Office (APFO)
Contact Address:
Address Type: mailing and physical
Address: 2222 West 2300 South
City: Salt Lake City
State or Province: Utah
Postal Code: 84119-2020
Country: USA
Contact Voice Telephone: 801-844-2922
Contact Facsimile Telephone: 801-956-3653
Contact Electronic Mail Address: apfo.sales@slc.usda.gov
Browse Graphic:
Browse Graphic File Name: None
Browse Graphic File Description: None
Browse Graphic File Type: None
Data Quality Information:
Logical Consistency Report: NAIP 3.75 minute tile file names are based on the USGS quadrangle naming convention.
Completeness Report: None
Positional Accuracy:
Horizontal Positional Accuracy:
Horizontal Positional Accuracy Report: NAIP horizontal accuracy specifications have evolved over the life of the program. From 2003 to 2004 the specifications were as follows: 1-meter GSD imagery was to match within 3-meters, and 2-meter GSD to match within 10 meters of reference imagery. For 2005 the 1-meter GSD specification was changed to 5 meters matching the reference imagery. In 2006 a pilot project was performed using true ground specifications rather than reference imagery. All states used the same specifications as 2005 except Utah, which required a match of +/- 6 meters to true ground. In 2007 all specifications were the same as 2006 except Arizona used true ground specifications and all other states used reference imagery. In 2008 and subsequent years no 2-meter GSD imagery was acquired and all specifications were the same as 2007 except approximately half of the states acquired used true ground specifications and the other half used reference imagery. The 2008 states that used absolute ground control where; Indiana, Minnesota, New Hampshire, North Carolina, Texas, Vermont, and Virginia. From 2009 to present all NAIP imagery acquisitions used the +/- 6 meters to ground specification.
Lineage:
Source Information:
Source Citation:
Citation Information:
Originator: USDA-FSA-APFO Aerial Photography Field Office
Publication Date: 20151117
Title: PORTSMOUTH, NE
Geospatial Data Presentation Form: remote-sensing image
Type of Source Media: Unknown
Source Time Period of Content:
Time Period Information:
Single Date/Time:
Calendar Date: 20150821
Source Currentness Reference: Aerial Photography Date for aerial photo source.
Source Citation Abbreviation: Georectifed Image
Source Contribution: Digital Georectifed Image.
Process Step:
Process Description: DOQQ Production Process Description USDA FSA APFO NAIP Program 2015 State: Ohio The imagery was collected using the following digital sensors: Leica ADS-100 (Serial Number 10542) Leica ADS-100 (Serial Number 10547) Leica ADS-100 (Serial Number 10548) with Flight and Sensor Control Management System (FCMS) firmware 4.40. Cameras are calibrated radiometrically and geometrically by the manufacturer and are all certified by the USGS. Collection was performed using a combination of the following twin-engine aircraft: Turbins flying at 26,5000 ft above mean terrain (tail number: PAY2 N400CM) (tail number: AC90 N690LN) (tail number: AC90 N910FC) With these flying heights, there is a 28% sidelap, giving the collected data nominal ground sampling distance of 0.60 meters at 26,500. Based-upon the CCD Array configuration present in the ADS digital sensor, imagery for each flight line is 12,000-pixels in width. Red, Green, Blue, Near-Infrared and Panchromatic image bands were collected. The ADS 100 has the following band specifications: Red 619-651 Green 525-585 Blue 435-495 Near Infrared 808-882 all values are in nanometers Collected data was downloaded to portable hard drives and shipped to the processing facility daily. Raw flight data was extracted from external data drives using GPro software. Airborne GPS / IMU data was post-processed using INYS, PosPac and/or TerraPos software and reviewed to ensure sufficient accuracy for project requirements. Using XPro software, planar rectified images were generated from the collected data for use in image quality review. The planar rectified images were generated at five meter resolution using a two standard deviation histogram stretch. Factors considered during this review included but were not limited to the presence of smoke and/or cloud cover, contrails, light conditions, sun glint and any sensor or hardware-related issues that potentially could result in faulty data. When necessary, image strips identified as not meeting image quality specifications were re-flown to obtain suitable imagery. Aero triangulation blocks were defined primarily by order of acquisition and consisted of four to seventeen strips. Image tie points providing the observations for the least squares bundle adjustment were selected from the images using an auto correlation algorithm. Photogrammetric control points consisted of photo identifiable control points, collected using GPS field survey techniques. The control points were loaded in to a softcopy workstation and measured in the acquired image strips. A least squares bundle adjustment of image pass points, control points and the ABGPS was performed to develop an aero triangulation solution for each block using Inpho software. Upon final bundle adjustment, the triangulated strips were ortho-rectified to the digital elevation model (DEM) The most recent USGS 10 meter DEMs were used in the rectification process. Positional accuracy was reviewed in the rectified imagery by visually verifying the horizontal positioning of the known photo-identifiable survey locations using ArcGIS software. The red, green, blue, and infrared bands were combined to generate a final ortho-rectified image strip. The ADS sensor collects twelve bit image data which requires radiometric adjustment for output in standard eight bit image channels. The ortho-rectified image strips were produced with the full 12 bit data range, allowing radiometric adjustment to 8 bit range to be performed on a strip by strip basis during the final mosaicking steps. The 12 bit data range was adjusted for display in standard eight bit image channels by defining a piecewise histogram stretch using OrthoVista Radiometrix software. A constant stretch was defined for each image collection period, and then strip by strip adjustments were made as needed to account for changes in sun angle and azimuth during the collection period. Strip adjustments were also made to match the strips histograms as closely as possible to APFO specified histogram metrics and color balance requirements. Automated balancing algorithms were applied to account for bi- directional reflectance as a final step before the conversion to 8 bit data range. The imagery was mosaicked using manual seam line generation in Intergraph GeoMedia OrthoPro.
Process Date: 20151117
Spatial Data Organization Information:
Indirect Spatial Reference: Scioto County, OH
Direct Spatial Reference Method: Raster
Raster Object Information:
Raster Object Type: Pixel
Row Count: 1
Column Count: 1
Spatial Reference Information:
Horizontal Coordinate System Definition:
Planar:
Grid Coordinate System:
Grid Coordinate System Name: Universal Transverse Mercator
Universal Transverse Mercator:
UTM Zone Number: 17
Transverse Mercator:
Scale Factor at Central Meridian: 0.9996
Longitude of Central Meridian: -81.0
Latitude of Projection Origin: 0.0
False Easting: 500000
False Northing: 0.0
Planar Coordinate Information:
Planar Coordinate Encoding Method: row and column
Coordinate Representation:
Abscissa Resolution: 1
Ordinate Resolution: 1
Planar Distance Units: meters
Geodetic Model:
Horizontal Datum Name: North American Datum of 1983
Ellipsoid Name: Geodetic Reference System 80 (GRS 80)
Semi-major Axis: 6378137
Denominator of Flattening Ratio: 298.257
Entity and Attribute Information:
Overview Description:
Entity and Attribute Overview: 32-bit pixels, 4 band color(RGBIR) values 0 - 255
Entity and Attribute Detail Citation: None
Distribution Information:
Distributor:
Contact Information:
Contact Organization Primary:
Contact Organization: U.S. Geological Survey, National Geospatial Technical Operations Center
Contact Address:
Address Type: mailing and physical
Address: 1400 Independence Road
City: Rolla
State or Province: MO
Postal Code: 65401
Contact Address:
Address Type: mailing and physical
Address: Box 25046 Denver Federal Center
City: Lakewood
State or Province: CO
Postal Code: 80225
Contact Voice Telephone: 1-888-ASK-USGS (1-888-275-8747)
Contact Electronic Mail Address: http://www.usgs.gov/ask/
Hours: Monday through Friday 8:00 AM to 4:00 PM
Contact Instructions: Metadata information can also be obtained through online services using The National Map Viewer, at http://nationalmap.usgs.gov or EarthExplorer, at http://earthexplorer.usgs.gov or Ask USGS at http://www.usgs.gov/ask.
Resource Description: m_3808217_ne_17_1_20150821_20151023.jp2
Distribution Liability: In no event shall the creators, custodians, or distributors of this information be liable for any damages arising out of its use (or the inability to use it).
Standard Order Process:
Digital Form:
Digital Transfer Information:
Format Name: JPEG2000
Transfer Size: 23.89889144897461
Digital Transfer Option:
Online Option:
Computer Contact Information:
Network Address:
Network Resource Name: https://prd-tnm.s3.amazonaws.com/StagedProducts/NAIP/oh_2015/38082/m_3808217_ne_17_1_20150821_20151023.jp2
Digital Form:
Digital Transfer Information:
Format Information Content: Multispectral 4-band
Digital Transfer Option:
Offline Option:
Offline Media: CD-ROM
Recording Format: ISO 9660 Mode 1 Level 2 Extensions
Offline Option:
Offline Media: DVD-R
Recording Format: ISO 9660
Offline Option:
Offline Media: USB Hard Disk
Recording Format: NTFS
Offline Option:
Offline Media: FireWire Hard Disk
Recording Format: NTFS
Fees: Contact the Aerial Photography Field Office for more information
Metadata Reference Information:
Metadata Date: 20160923
Metadata Contact:
Contact Information:
Contact Organization Primary:
Contact Organization: U.S. Geological Survey, National Geospatial Technical Operations Center
Contact Address:
Address Type: mailing and physical
Address: 1400 Independence Road
City: Rolla
State or Province: MO
Postal Code: 65401
Contact Address:
Address Type: mailing and physical
Address: Box 25046 Denver Federal Center
City: Lakewood
State or Province: CO
Postal Code: 80225
Contact Voice Telephone: 1-888-ASK-USGS (1-888-275-8747)
Contact Electronic Mail Address: http://www.usgs.gov/ask/
Hours: Monday through Friday 8:00 AM to 4:00 PM
Contact Instructions: Metadata information can also be obtained through online services using The National Map Viewer, at http://nationalmap.usgs.gov or EarthExplorer, at http://earthexplorer.usgs.gov or Ask USGS at http://www.usgs.gov/ask.
Metadata Standard Name: Content Standard for Digital Geospatial Metadata
Metadata Standard Version: FGDC-STD-001-1998