-
Federal
Water chemistry data and calculations for Fracture Sustainability Tests
Department of Energy —
Measured cation, anion, and silica are presented as well as calculations evaluating mass balance performed for 4 fracture sustainability tests under EGS conditions:... -
Federal
Shear Induced Permeability Test: Stripa Granite Temperature Pressure and Displacement Data
Department of Energy —
Spreadsheet containing the raw measured data, calibrated data, and brief explanation of data for Test1 Stripa Granite Geomechanical/Geochemical Test. Stress on... -
Federal
Fracture Sustainability Pressure, Temperature, Differential Pressure, and Aperture Closure Data
Department of Energy —
In these data sets, the experiment time, actual date and time, room temperature, sample temperature, upstream and downstream pressures (measured independently),... -
Federal
EGS Collab Experiment 1: SIMFIP Notch-164 GRL Paper
Department of Energy —
Characterizing the stimulation mode of a fracture is critical to assess the hydraulic efficiency and the seismic risk related to deep fluid manipulations. We have... -
Federal
Fracture Sustainability Test, Pre- and Post-Test Photomicrographs
Department of Energy —
The primary objective of this research is to understand how different rock types, mineral and fluid compositions, and fracture surface textures determine the... -
Federal
Images of Fracture Sustainability Test on Stripa Granite
Department of Energy —
Images of the Stripa Granite core before and after the fracture sustainability test. Photos of fracture faces of Stripa Granite core. -
Federal
DCIF (Directional Cooling-Induced Fracturing) Westerly Granite AE Borehole Damage Effect Test (Task 3-0)
Department of Energy —
Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on three rectangular Westerly granite blocks (width=depth=4.0", height=2.0") which were... -
Federal
EGS Collab Experiment 1: Core Logs
Department of Energy —
Core logs from the EGS Collab project Experiment 1 for the stimulation (Injection) well (E1-I), the Production well (E1-P), and monitoring wells (E1-OT, E1-OB,... -
Federal
CO2 Push-Pull Dual (Conjugate) Faults Injection Simulations
Department of Energy —
This submission contains datasets and a final manuscript associated with a project simulating carbon dioxide push-pull into a conjugate fault system modeled after... -
Federal
Simulations of Brady's-Type Fault Undergoing CO2 Push-Pull: Pressure-Transient and Sensitivity Analysis
Department of Energy —
Input and output files used for fault characterization through numerical simulation using iTOUGH2. The synthetic data for the push period are generated by running a... -
Federal
Effective Elastic and Neutron Capture Cross Section Calculations Corresponding to Simulated Fluid Properties from CO2 Push-Pull Simulations
Department of Energy —
The submission contains a .xls files consisting of 10 excel sheets, which contain combined list of pressure, saturation, salinity, temperature profiles from the... -
Federal
DCIF Westerly Granite AE Stress Effect Test (Task 3-1)
Department of Energy —
Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on rectangular Westerly granite blocks (width=depth=4.0", height=2.0"). Liquid nitrogen was...