Mars Atmosphere and Regolith COllector/PrOcessor for Lander Ops (MARCO POLO) Atmospheric Processing Module

Metadata Updated: July 17, 2020

The multi-NASA center Mars Atmosphere and Regolith COllector/PrOcessor for Lander Operations (MARCO POLO) project was established to build and demonstrate a methane/oxygen propellant production system in a Mars analog environment.[HTML_REMOVED] The MARCO POLO project will provide a demonstration platform for all aspects of Martian soil and atmospheric processing, beginning with the extraction of water from Martian soil, which would then be electrolyzed into hydrogen (H2) and oxygen (O2), and the capture of carbon dioxide (CO2) from the Martian atmosphere to produce methane (CH4) using H2 from the water. The lander is designed in a modular fashion with an Atmospheric Processing Module (APM), Soil Processing Module, Water Cleanup Module, Water Processing Module, and Power Production Module.[HTML_REMOVED] Work at the Kennedy Space Center (KSC) has focused on the Atmospheric Processing Module (APM).[HTML_REMOVED] The purpose of the APM is to freeze CO2 from a simulated Martian atmosphere at Martian pressures (~7 mbar) by using dual cryocoolers.[HTML_REMOVED] The resulting pressurized CO2 and H2 are fed to a Sabatier reactor to make CH4 and water vapor.[HTML_REMOVED] The CO2 freezer subsystem has a collection/supply design requirement of 88 g CO2/hr., and the Sabatier subsystem has a design requirement to produce 31.7 g/hr. CH4 fuel and 71.3 g/hr. H2O, which would also be electrolyzed to H2 and O2. The atmosphere of Mars consists of 95.32% CO2, 2.7% nitrogen, 1.6% argon, and trace amounts of water, carbon monoxide, and several other gases. At 7[HTML_REMOVED]mbar, the average pressure on the Martian surface, the freezing point of CO2 is 150[HTML_REMOVED]K ([HTML_REMOVED]123oC), which makes it necessary to use a cryocooler as the condensation method.[HTML_REMOVED] Dual cryocoolers are needed to operate in tandem (one collecting CO2 while the other is supplying the Sabatier reactor). The Sunpower Cryotel Model GT Stirling cycle cryocooler has the proper cooling capacity, low mass and power, and space flight heritage.[HTML_REMOVED] Lab testing of three copper cryocooler cold head designs to collect the CO2 show that only the [HTML_REMOVED]Ferris Wheel[HTML_REMOVED] design met the APM requirements.The full APM was designed and constructed during a series of projects at KSC.[HTML_REMOVED] The current APM CO2 Freezer consists of two cryocoolers and freezing chambers, a chiller to remove heat from the cryocoolers, a vacuum pump to produce Mars pressures in the chambers, two tanks, a mass flow controller for[HTML_REMOVED]simulated Mars atmosphere,[HTML_REMOVED]and various valves to control gas flow[HTML_REMOVED]and cooling water flow.[HTML_REMOVED][HTML_REMOVED]Multiple optimization tests at varying flow rates showed that the CO2 Freezer subsystem captures an average of 99 g CO2/hr. in 1.4 hr. at a feed rate of 1.2 SLPM of Mars gas simulant, well above the required rate of 88 g/hr.[HTML_REMOVED] The CO2 capture fraction averaged 79% while the CO2 sublimation rate averaged 95 g/hr.[HTML_REMOVED] As the CO2 sublimes, it is pumped into the storage tanks at the top of Figure 3.To improve the CO2 conversion efficiency of the Sabatier subsystem and to recover unreacted H2, a recycling process was added. After the water product is condensed a membrane module separates the CH4 product from residual CO2 and H2, then a compressor recycles the CO2 and H2 back through the Sabatier reactor.[HTML_REMOVED] Testing of the new Sabatier reactor without recycling has been promising, with 97% conversion of the CO2 without the overheating experienced with a reactor supplied by

Access & Use Information

Public: This dataset is intended for public access and use. License: No license information was provided. If this work was prepared by an officer or employee of the United States government as part of that person's official duties it is considered a U.S. Government Work.

Downloads & Resources


Metadata Created Date August 1, 2018
Metadata Updated Date July 17, 2020

Metadata Source

Harvested from NASA Data.json

Additional Metadata

Resource Type Dataset
Metadata Created Date August 1, 2018
Metadata Updated Date July 17, 2020
Publisher Space Technology Mission Directorate
Unique Identifier TECHPORT_16846
Maintainer Email
Public Access Level public
Bureau Code 026:00
Metadata Context
Metadata Catalog ID
Schema Version
Catalog Describedby
Harvest Object Id df44f9be-3b96-4c01-8263-7d1bc9513389
Harvest Source Id 39e4ad2a-47ca-4507-8258-852babd0fd99
Harvest Source Title NASA Data.json
Data First Published 2014-02-01
Homepage URL
Data Last Modified 2020-01-29
Program Code 026:027
Source Datajson Identifier True
Source Hash eab7bcd34ee6b96547407142eec4647e7d035500
Source Schema Version 1.1

Didn't find what you're looking for? Suggest a dataset here.