Low background infrared (LBIR) facility

Metadata Updated: March 8, 2017

The Low background infrared (LBIR) facility was originally designed to calibrate user supplied blackbody sources and to characterize low-background IR detectors and attenuators. Today, the facility continues to operate in this capacity providing calibrations of cryogenic blackbodies and transfer standard radiometers in low background vacuum (space-like) environments for the U.S. Missile Defense Agency and its contractors. We are currently also developing capabilities to characterize and calibrate large area blackbodies used for calibrating remote sensing instruments for climate research. In addition, we have developed methods for measuring thermal emissivity of materials at low temperatures with applications for example to cryogenic thermal shield designs for the ITER tokamak fusion experiment.Cryogenic blackbody calibrationsThe LBIR facility supports the calibration needs of the user community with two high vacuum, low temperature test chambers. Both the broadband calibration chamber (BCC) and the spectral calibration chamber (SCC) have an interior working volume that is approximately 150 cm in length and 50 cm in diameter, and can operate at ultra-high vacuum over a temperature range of 20 K to 100 K. Each chamber houses an Absolute Cryogenic Radiometer (ACR). A customer[HTML_REMOVED]s infrared blackbody source is directly calibrated for its radiance temperature versus its control temperature setting from the measured irradiance at the NIST ACR inside one of the calibration chambers. The LBIR facility also maintains an Antechamber that is used for calibrating blackbodies that are too large or too high power to be operated in the calibration chambers themselves.A Cryogenic shutter assembly (CSA) has been developed to accommodate large area blackbody from customers serving the earth remote sensing community for calibrating the radiance temperature and characterizing the total emittance of the cavity. In addition, we have recently developed a large-area (12 cm aperture) fluid-bath blackbody source with a cryogenic vacuum interface and a cavity temperature uncertainty of less than 10 mK. This source can be used for calibration of spectral radiometers as well as for testing the uncertainty of radiance temperature measurements using an ACR.For more details about the calibrations and quality system, see Low background infrared calibration facility quality manual.Research and development of cryogenic detector standardsA Blocked-Impurity Band (BIB)-Trap detector is being developed using arsenic-doped silicon detectors in a trapping configuration to attain a flat spectral response and overall quantum efficiency greater than 98% over the 4 to 28 micrometer spectral range. A pico-watt ACR (pW-ACR) is being developed to calibrate 1 pW of optical power with 0.1% uncertainty. The new radiometer will be nearly 10,000 times more sensitive than the present ACRs at the LBIR facility yet have nearly the same response time. Finally, in collaboration with the NIST Boulder laboratories, we are developing compact monolithic ACRs based upon carbon nanotube absorbers and temperature sensors capable of high speed photo-response out to 200 [HTML_REMOVED]m wavelength.Transfer standard radiometersTwo portable transfer-standard radiometers, the BMDO Transfer Radiometer (BXR) and the Missile Defense Transfer Radiometer (MDXR) were developed to provide on-site calibration support for infrared test chambers located at customer facilities. By transferring the calibration to the output of infrared collimators, NIST traceability is established for the customer[HTML_REMOVED]s test chambers. The BXR is a filter radiometer covering the 3 [HTML_REMOVED]m to 14 [HTML_REMOVED]m spectral range over 10 filter bands. The MDXR has the same capabilities as the BXR, but is also equipped with a cryogenic Fourier transform spectrometer (FTS) to spectrally resolve the infrared beam from 2 [HTML_REMOVED]m to 30 [HTML_REMOVED]m. The LBIR facility is equipped with an IR Collimator that produces a 10 cm diameter IR collimated beam sub-milliradian divergence to calibrate these transfer standard radiometers. An ACR is used to calibrate the collimated beam., and this calibrated beam is then used to calibrate the BXR and MDXR.

Access & Use Information

Public: This dataset is intended for public access and use. License: No license information was provided. If this work was prepared by an officer or employee of the United States government as part of that person's official duties it is considered a U.S. Government Work.

Downloads & Resources

No file downloads have been provided. The publisher may provide downloads in the future or they may be available from their other links.


Metadata Created Date March 8, 2017
Metadata Updated Date March 8, 2017

Metadata Source

Harvested from Federal Laboratory Consortium Data.json

Additional Metadata

Resource Type Dataset
Metadata Created Date March 8, 2017
Metadata Updated Date March 8, 2017
Publisher Federal Laboratory Consortium
Unique Identifier 31EDB21D-B6BE-446B-8E71-57696AA76D28
Simon Kaplan
Maintainer Email
Public Access Level public
Metadata Context https://project-open-data.cio.gov/v1.1/schema/catalog.jsonld
Schema Version https://project-open-data.cio.gov/v1.1/schema
Catalog Describedby https://project-open-data.cio.gov/v1.1/schema/catalog.json
Flcbusinessurl https://flcbusiness.federallabs.org/#/laboratory/5759
Harvest Object Id fe8cbad4-9cdf-4ae3-af34-4b667496425d
Harvest Source Id 5859cfed-553c-48de-a478-b67b5225f6fc
Harvest Source Title Federal Laboratory Consortium Data.json
Repphone 301-975-2336
Sizesqft 0
Source Datajson Identifier True
Source Hash 9d93a7f1f63f7b7973553ac6fad5475291054b7a
Source Schema Version 1.1

Didn't find what you're looking for? Suggest a dataset here.