Electrostatic Separation of Lunar Regolith for Size Beneficiation Using Same-Material Tribocharging

Metadata Updated: May 2, 2019

The success of future long-term manned lunar missions depends on the development of certain key technologies. One such technology, the utilization of lunar regolith for the construction of parts and structures, is one of the most significant factors in reducing mission cost, risk, and complexity. Current research on this topic focuses on 3D printing techniques using regolith and other advanced fabrication methods. In order to create strong, reliable parts, the mineral composition and granular size of the regolith must be tightly controlled. Though many terrestrial devices exist for sorting granular materials by size and material, like sieves and centrifuges, many of these are large, complex, or ineffective in the low-gravity, highly electrical lunar environment. Furthermore, the lunar surface is highly electrically charged, posing risks of discharge and significant clumping in many regolith-handling devices. Therefore, a novel device for size beneficiation of lunar grains which removes or utilizes this charge will be necessary to advance the development of resource utilization technologies and improve future exploration missions.

Tribocharging shows great promise as a method for both size beneficiation and mineral separation, and I propose to develop a device using this phenomenon for lunar regolith. When a granular mixture is shaken, the triboelectric effect causes charge to accumulate on particular minerals in the mixture in a predictable way. A far less understood aspect of the triboelectric effect is the tendency for negative charge to also accumulate on smaller grains, even when the mixture is composed of only one insulating material. While mineral separation using tribocharging has been demonstrated successfully, no space-ready device yet exists to take advantage of the size-dependent charging effect.

I will design, build, and test such a device. I will first develop an underlying theory for same-material, size-dependent tribocharging through experiments. This theory will be applied to lunar regolith, a complex and disperse mixture of many materials and sizes. The device will use electrostatic separation of tribocharged grains to sort the material with minimal moving parts or contact with the grains. Due to the highly adhesive and abrasive nature of lunar regolith, this significantly increases the lifespan of the device and reduces its complexity relative to other grain separation concepts. In addition, the existing charge on lunar grains reduces the effectiveness of other existing separation methods, but is a boon to an electrostatic separation device. The results of my experiments will reveal the effects of various pre- and post-treatment methods on tribocharging of regolith, which I can use to increase the degree of size separation and remove the charge after separation. Therefore, the device would take raw charged regolith as input, and produce electrically neutral grains sorted by mineral and/or size, depending on the desired mode of operation.

Electrostatic size beneficiation using tribocharging is still a very young field, but shows promise for low-complexity regolith separation. The lack of understanding of this effect has limited its use in grain sorting applications to date. Given the recent push for better in situ resource utilization, and the advancements in 3D printing technologies, there is a growing need for a device to convert regolith into a usable raw material. My proposed solution is simple, reliable, and flexible, and provides a design heritage for grain separators in other environments due to the universality of tribocharging. Developing this technology is a critical and innovative step toward exploration of any dusty celestial body.

Access & Use Information

Public: This dataset is intended for public access and use. License: U.S. Government Work

Downloads & Resources

Dates

Metadata Created Date August 1, 2018
Metadata Updated Date May 2, 2019

Metadata Source

Harvested from NASA Data.json

Additional Metadata

Resource Type Dataset
Metadata Created Date August 1, 2018
Metadata Updated Date May 2, 2019
Publisher Space Technology Mission Directorate
Unique Identifier TECHPORT_91440
Maintainer
TECHPORT SUPPORT
Maintainer Email
Public Access Level public
Bureau Code 026:00
Metadata Context https://project-open-data.cio.gov/v1.1/schema/catalog.jsonld
Metadata Catalog ID https://data.nasa.gov/data.json
Schema Version https://project-open-data.cio.gov/v1.1/schema
Catalog Describedby https://project-open-data.cio.gov/v1.1/schema/catalog.json
Datagov Dedupe Retained 20190501230127
Harvest Object Id 65dd121b-872d-449c-96a5-4625f46cf2e5
Harvest Source Id 39e4ad2a-47ca-4507-8258-852babd0fd99
Harvest Source Title NASA Data.json
Data First Published 2019-08-01
Homepage URL https://techport.nasa.gov/view/91440
License http://www.usa.gov/publicdomain/label/1.0/
Data Last Modified 2018-07-19
Program Code 026:027
Source Datajson Identifier True
Source Hash 66617afb2ac9a5b98cd03a60eba0369fa67de8e9
Source Schema Version 1.1

Didn't find what you're looking for? Suggest a dataset here.