Deployable Thermoelectric Metamaterial Energy Harvesting Monitoring System

Metadata Updated: November 12, 2020

This project will combine a novel asynchronous monitoring system with the first-of-its-kind thermoelectric metamaterial.  The thermoelectric prototype is constructed using bismuth telluride/copper and magnesium silicide/copper artificially anisotropic thermoelements, and it has an output voltage of 12 mV obtained for ΔT=40°C with a corresponding Seebeck coefficient of 300 μV/K. A high conversion efficiency (ZT) requires conflicting properties of low thermal conductivity and low electrical resistivity. While this is conventionally difficult, metamaterials allow these two parameters to be decoupled. The monitoring system will be configurable for use with a wide range of instrumentation producing a deployable monitoring system powered with the new metamaterial technology.  An asynchronous sensor device will be constructed based on the SSC patented monitoring technology incorporating a new energy harvesting circuit designed for use with the thermoelectric metamaterial prototype.  The monitoring system technology is a highly power conservative monitoring system consisting of a base station and wireless sensor units. The sensors lay fully unpowered within a dormant state until they receive a trigger energy which consumes no stored power. The monitoring technology is capable of going completely powerless while allowing its unique power system to be charged by energy harvesting components, and the device is re-energized upon storing a sustainable amount of power. When activated, the sensor takes a measurement, transmits the data to the base station with a synchronized time stamp, and then returns to its dormant state. The monitoring system was primarily constructed as a torsional and linear strain sensor system potted in a hydrogen compatible material for Class 1 Division 2 environments, and the data tracking and archiving capabilities are beneficial in building operational and structural knowledge. By incorporating this system, the prototype energy harvester will be deployable within harsh ground propulsion environments.  Additionally, the system could be utilized in commercial applications that require long term monitoring of events associated with different types of strain, cryogenic temperatures, ambient temperatures, limit switches, milliamp signals, volt signals and magnetic fields.Although this technology is designed to improve the monitoring of high-geared ball and linearly-actuated valves used in propulsion testing to predict valve life span and failure, it is not limited to use with only valves. It can monitor operational data, such as temperature in a particular location in a building, or the strain at a specific point on a bridge.A single monitoring system will be capable of collecting transmitted data from both thermoelectrically powered sensor units for performing operational comparisons.  To perform operational comparisons, one sensor unit will use the new one-of-a-kind thermoelectric metamaterial prototype, while a similarly constructed second sensor unit will use commercially available bismuth telluride thermoelectric thermal harvesting components for. The thermoelectric metamaterial prototypes are currently fragile, and the integration of the prototype into the sensor system will ruggedize the components and make the unit a more robust device.  This will allow the unproven technology to be operationally verified. A single monitoring system will be capable of collecting transmitted data from both thermoelectrically powered sensor units. 

Access & Use Information

Public: This dataset is intended for public access and use. License: No license information was provided. If this work was prepared by an officer or employee of the United States government as part of that person's official duties it is considered a U.S. Government Work.

Downloads & Resources


Metadata Created Date November 12, 2020
Metadata Updated Date November 12, 2020

Metadata Source

Harvested from NASA Data.json

Additional Metadata

Resource Type Dataset
Metadata Created Date November 12, 2020
Metadata Updated Date November 12, 2020
Publisher Space Technology Mission Directorate
Unique Identifier Unknown
Identifier TECHPORT_32747
Data First Published 2016-03-01
Data Last Modified 2020-01-29
Public Access Level public
Bureau Code 026:00
Metadata Context
Metadata Catalog ID
Schema Version
Catalog Describedby
Homepage URL
Program Code 026:027
Source Datajson Identifier True
Source Hash 894b379c8955403e87a01e8c5082fa5bf0e927b3
Source Schema Version 1.1

Didn't find what you're looking for? Suggest a dataset here.