Advanced Propellants for Scalable, Multipurpose Electrospray Ion Thrusters

Metadata Updated: July 17, 2020

Ionic liquid ion sources (ILIS) have numerous applications in spacecraft propulsion and focused ion beam technologies. The Space Propulsion Lab at the Massachusetts Institute of Technology is developing electrospray ion thrusters for small satellites. Current work is focused on the characterization of ion beams produced by various ionic liquids. Determining the best electrospray propellants and what properties drive their performance is the focus of the proposed work. Additional areas of research include fully characterizing ILIS, increasing the predictability of ion beam properties based on ionic liquid composition, and determining the limitations of ILIS for focused ion beam and spacecraft propulsion applications. Understanding and predicting ILIS beam properties allows for its application to small satellites requiring precise position control as well as ion beam lithography.

Ionic liquids, or molten salts, are liquids at room temperature composed of positive and negative ions. ILIS works by using an electric field to stress the liquid surface, extract ions from the liquid, and accelerate the ions to high velocities. A single ion source consists of a sharp tip coated with ionic liquid, placed close to a metal extraction plate with a hole in it to let the ions pass through. An array of ILIS tips can be used as an electrospray thruster. Electrospray thrusters have many advantages over plasma thrusters. The most significant advantage is that electrospray thrusters are very compact and can be used on small satellites. Plasma thrusters are difficult to scale down for use on small spacecraft because the plasma density must be increased, which greatly decreases the lifetime of the thruster. Because of this, electrospray propulsion has the potential to revolutionize the attitude and position control of small spacecraft.

Less than ten ionic liquids, out of thousands, have been tested as propellants for electrospray thrusters. It is very likely that the best ionic liquids for electrospray propulsion have not been tested in ILIS or have not yet been synthesized. For example, a major source of inefficiency comes from non-uniform beam composition. Determining how liquid composition affects this is the focus of current work. However, beam composition is only a small part of finding the best propellants. Determining how bulk liquid properties like conductivity, surface tension, and viscosity affect performance is another area of study. Additionally, it is critical to investigate how liquid properties affect fundamental ILIS processes: ion evaporation, microfluidics, and interface interactions. A complete understanding of how liquid properties control performance will enable the development of highly efficient, variable thrust electrospray thrusters that can be used as a multipurpose propulsion system. It also will enable the use of electrospray thrusters for precision drag-free spaceflight, possibly like that required by the Laser Interferometer Space Antenna (LISA).

Electrospray thrusters and ILIS have the potential to improve small spacecraft propulsive capabilities and focused ion beam technologies. Electrospray thrusters could enable low-cost, small spacecraft to accomplish the scientific goals of large, costly platforms, which is undoubtedly valuable to society. ILIS focused ion beam deposition and etching could vastly improve and expand the possible applications of these technologies by offering thousands of new options for ion beam constituents. Determining the best propellants for electrospray thrusters, investigating the limitations of ILIS, and evaluating the feasibility of a small scale LISA mission is the focus of the proposed work and would be a part of making these electrospray technologies possible.

Access & Use Information

Public: This dataset is intended for public access and use. License: No license information was provided. If this work was prepared by an officer or employee of the United States government as part of that person's official duties it is considered a U.S. Government Work.

Downloads & Resources

Dates

Metadata Created Date August 1, 2018
Metadata Updated Date July 17, 2020

Metadata Source

Harvested from NASA Data.json

Additional Metadata

Resource Type Dataset
Metadata Created Date August 1, 2018
Metadata Updated Date July 17, 2020
Publisher Space Technology Mission Directorate
Unique Identifier TECHPORT_91472
Maintainer
Public Access Level public
Bureau Code 026:00
Metadata Context https://project-open-data.cio.gov/v1.1/schema/catalog.jsonld
Metadata Catalog ID https://data.nasa.gov/data.json
Schema Version https://project-open-data.cio.gov/v1.1/schema
Catalog Describedby https://project-open-data.cio.gov/v1.1/schema/catalog.json
Harvest Object Id a16fefa9-4b80-4bdf-ba4d-1eba8235d44b
Harvest Source Id 39e4ad2a-47ca-4507-8258-852babd0fd99
Harvest Source Title NASA Data.json
Data First Published 2019-08-01
Homepage URL https://techport.nasa.gov/view/91472
Data Last Modified 2020-01-29
Program Code 026:027
Source Datajson Identifier True
Source Hash d5874f4382f676b9449f6c932fb3b544c9a73451
Source Schema Version 1.1

Didn't find what you're looking for? Suggest a dataset here.