A New Approach to Uncertainty Reduction in Launch Vehicle Compartment Venting

Metadata Updated: July 17, 2020

Launch vehicle compartments are vented to the external environment during ascent to minimize undesirable structural loading. Prediction of venting performance is an essential element of launch vehicle design and mission development. However, because of complex interactions between the vent flow and the high-speed external flow, there is substantial uncertainty in those predictions. This limitation results in unnecessary vehicle structural mass (reducing payload mass) and increased risk of vehicle or payload loss or damage from structural failure or malfunction. The focus of this project is a novel vent concept offering more predictable performance. Launch vehicle compartments (e.g. interstage, fairings, payload shroud, etc.) are vented to the external flow during ascent to relieve the internal pressure as the external pressure falls. Vents are openings between the internal compartment and the external environment. They can range in configuration from simple [HTML_REMOVED]holes[HTML_REMOVED] (orifices) in the vehicle skin to substantially more complicated arrangements. The objectives of the venting system are to minimize adverse differential-pressure loading of the vehicle skin, prevent ingestion of hot gas from the external boundary-layer, and control the compartment depressurization rate to avoid payload damage and ensure proper shroud separation. These requirements are often conflicting, creating a complex design situation where too much venting can be worse than too little.A transient venting analysis is conducted during vehicle development to determine suitable vent sizes [HTML_REMOVED] locations and the resulting structural loads. The present state of the art in venting analysis and design is based on a legacy capability (developed during the late 1960s and early 1970s) that is less than ideal. One known deficiency is that the level of uncertainty in the prediction of vent performance is significant. This uncertainty has costs associated with it. One is that the vehicle structure is over-conservative to account for uncertainty in the predicted skin loads, resulting in an unnecessary reduction in payload capacity. Another cost is the increased risk of damage or malfunction[HTML_REMOVED]that compromises mission objectives (e.g. 1973 Saturn-V/Skylab-1) or catastrophic failure resulting in vehicle/payload loss. During the 1990s, there was a series of Long March shroud separation failures that were attributed to venting. Recent unexplained shroud separation failures may also be venting related.While the prediction of launch vehicle compartment venting involves a number of inputs, and corresponding sources of uncertainty, it depends to a large extent on the precision with which the flow characteristics of the vents are known. Unfortunately, the fluid mechanics of a vent discharging into a high-speed cross-flow is extremely complex and not well understood. Consequently, the prediction of vent performance relies on empirically derived discharge coefficients. Such data for compressible cross-flow conditions are extremely limited. Moreover, these data exhibit large variations in measured cross-flow discharge coefficient for supposedly identical test conditions. The inconsistencies may be due to unsteadiness, hysteresis, bi-stable phenomena, and/or experimental error. The deficiencies in the available data are presently handled by setting upper and lower limits to bound the observed vent flow characteristics. However, those limits differ by a factor of five in some cases. Another problem is that the experimental data are restricted to idealized vent geometries (i.e. a sharp-edged orifice in a thin plate). How well these data represent the performance of real flight-configuration vents (which can include ducting pathways, screens, rain shields, one-way valves, etc.) is an open question.The focus of this project is a novel vent concept offering more predictable performance.

Access & Use Information

Public: This dataset is intended for public access and use. License: No license information was provided. If this work was prepared by an officer or employee of the United States government as part of that person's official duties it is considered a U.S. Government Work.

Downloads & Resources


Metadata Created Date August 1, 2018
Metadata Updated Date July 17, 2020

Metadata Source

Harvested from NASA Data.json

Additional Metadata

Resource Type Dataset
Metadata Created Date August 1, 2018
Metadata Updated Date July 17, 2020
Publisher Space Technology Mission Directorate
Unique Identifier TECHPORT_14636
Public Access Level public
Bureau Code 026:00
Metadata Context https://project-open-data.cio.gov/v1.1/schema/catalog.jsonld
Metadata Catalog ID https://data.nasa.gov/data.json
Schema Version https://project-open-data.cio.gov/v1.1/schema
Catalog Describedby https://project-open-data.cio.gov/v1.1/schema/catalog.json
Harvest Object Id 60f5a896-5f3c-43c6-abba-d90c92e53209
Harvest Source Id 39e4ad2a-47ca-4507-8258-852babd0fd99
Harvest Source Title NASA Data.json
Data First Published 2018-06-26
Homepage URL https://techport.nasa.gov/view/14636
Data Last Modified 2020-01-29
Program Code 026:027
Source Datajson Identifier True
Source Hash 61ffd4f3d25f090a888bb84323f74617e5df64e1
Source Schema Version 1.1

Didn't find what you're looking for? Suggest a dataset here.