89 datasets found
-
Federal
New York Bight and Gulf of Maine bathymetric contours (NY_GOME_CONTOURS)
Department of the Interior —
This bathymetric shapefile contains 10 m contours for the continental shelf and 100 m beyond the 200 m shelf edge. The contours have been derived from the National... -
Federal
Lake Koocanusa Digital Elevation Model (DEM), Lincoln County, Montana
Department of the Interior —
In 2016, the U.S. Army Corps of Engineers (USACE) started collecting high-resolution multibeam echosounder (MBES) data on Lake Koocanusa. The survey originated near... -
Federal
Bathymetric Map of the Bering/Chukchi Sea
Department of the Interior —
Two bathymetric maps were developed by the U.S. Geological Survey, one for the Chukchi Sea and Arctic Ocean, and one for the Aleutian Trench and Bering Sea. The 2... -
Federal
Contoured Bathymetry for Lake Pontchartrain, Louisiana (PONTCONT)
Department of the Interior —
This is the contoured bathymetry for Lake Pontchartrain created for USGS Professional Paper 1634 by Laura Hayes using Vertical Mapper. -
Federal
Bathymetric contours of Lago Guayabal, Puerto Rico, December 2017
Department of the Interior —
This dataset is a polyline shapefile containing bathymetric contours, at 1-meter intervals, of Lago Guayabal, Villalba, Puerto Rico. The contours were generated from... -
Federal
Coastal Bathymetry of the Bering, Chuckhi, and Beaufort Seas
Department of the Interior —
Bathymetric contours were generated from soundings collected by National Ocean Service vessels from ~1900 to ~1971. The 1:250,000 maps are available for U.S. coastal... -
Federal
10-meter bathymetric contours from multibeam bathymetry in the East and West Flower Garden regions, northwestern Gulf of Mexico outer shelf (polyline shapefile)
Department of the Interior —
This shapefile shows the 10 meter contour interval based on the 5-meter multibeam bathymetry (Dartnell and Gardner, 1999) from the Flower Garden Banks region. -
Federal
Contours--Monterey Canyon and Vicinity, California
Department of the Interior —
This part of DS 781 presents bathymetric contours for several seafloor maps of the Monterey Canyon and Vicinity map area, California. The shapefile is included in... -
Federal
Wells Creek Dolomite: geospatial geologic structural datasets in Tennessee
Department of the Interior —
The Wells Creek Dolomite is the lowest unit of the Stones River Group. The Wells Creek consists of cherty limestone that underlies the Murfreesboro Limestone of the... -
Federal
Coastal Features Extracted from Landsat Satellite Imagery, Delaware Bay, New Jersey to Shinnecock Bay, New York, 2008-2022
Department of the Interior —
This data release serves as an archive of coastal land-cover and feature datasets derived from Landsat satellite imagery from Delaware Bay, New Jersey (NJ) to... -
Federal
MONT95C - Bathymetry contours of the southern Monterey Bay area between Moss Landing and Monterey, California
Department of the Interior —
Derived contours at 10-m intervals are from data collected by the USGS with a multibeam (Simrad EM1000) sidescan sonar system in the southern Monterey Bay between... -
Federal
Coastal Features Extracted from Landsat Satellite Imagery, Northern Chandeleur Islands, Louisiana, 1984-2019
Department of the Interior —
The data release (Bernier, 2021) associated with this metadata record serves as an archive of coastal land-cover and feature datasets derived from Landsat satellite... -
Federal
Geospatial geologic structural datasets, Chattanooga Shale, Wells Creek Dolomite, and Knox Group, Tennessee, USA
Department of the Interior —
Data about the top and bottom altitude, depth from land surface and/or the thickness of three geologic units in Tennessee were converted into geospatial format for... -
Federal
5-m interval contours of smoothed multibeam bathymetry in western Massachusetts Bay map Quadrangle 1 (Q1_5MCTR.SHP)
Department of the Interior —
The U.S. Geological Survey has conducted geologic mapping to characterize the sea floor offshore of Massachusetts. The mapping was carried out using a Simrad Subsea... -
Federal
1-m interval contours of smoothed multibeam bathymetry in western Massachusetts Bay map Quadrangles 1-3 (WMB_1MCTR.SHP)
Department of the Interior —
The U.S. Geological Survey has conducted geologic mapping to characterize the sea floor offshore of Massachusetts. The mapping was carried out using a Simrad Subsea... -
Federal
CCALBATC - bathymetric contours for the central California region between Point Arena and Point Sur.
Department of the Interior —
CCALBATC consists of bathymetric contours at 10-m and 50-m intervals for the area offshore of central California between Point Arena to the north and Point Sur to the... -
Federal
Knox Group: geospatial geologic structural datasets in Tennessee
Department of the Interior —
The Knox Dolomite is currently recognized as the Knox Group. The Mascot Dolomite, the upper unit of the Knox Group, is dolomite and dolomitic limestone of Lower-... -
Federal
5 m Bathymetric Contours for Long Island Sound (LIS1992)
Department of the Interior —
This bathymetric contour data set was derived from a gridded data set obtained from URI (B.Tyce, G. Hatcher). They used the "Gridder" program to obtain the grid. This... -
Federal
Depth contours derived from swath bathymetry data collected in Buzzards Bay by the U.S. Geological Survey and the National Oceanic and Atmospheric Administration offshore of Massachusetts in 2004, 2009, 2010, and 2011 (BB_5mCntr Esri Polyline Shapefile, Geographic, WGS84).
Department of the Interior —
These data were collected under a cooperative agreement between the Massachusetts Office of Coastal Zone Management (CZM) and the U.S. Geological Survey (USGS),... -
Federal
Spatial data set of mapped water-level changes in the High Plains aquifer, 2015 to 2017
Department of the Interior —
The High Plains aquifer extends from approximately 32 to 44 degrees north latitude and 96 degrees 30 minutes to 106 degrees west longitude. The aquifer underlies...
89 datasets found