-
Federal
Net infiltration of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
Recharge in the Death Valley regional ground-water flow system (DVRFS) was estimated from net infiltration simulated by Hevesi and others (2003) using a deterministic... -
Federal
Thicknesses of hydrogeologic units used in the hydrogeologic framework and transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
A digital three-dimensional hydrogeologic framework model (HFM) represents the geometry and extent of hydrogeologic units (HGUs) and major structures in the Death... -
Federal
Historical boundary of the Death Valley regional ground-water flow system by Harrill and Prudic (1998), for the Death Valley regional ground-water flow system study, Nevada and California
Department of the Interior —
This digital data set is a historical definition of the extent (approximately 42,600 square-kilometers) and lateral boundary of the Death Valley regional ground-water... -
Federal
Regional potentiometric-surface contours by Bedinger and Harrill (2004), for the Death Valley regional ground-water flow system study, Nevada and California
Department of the Interior —
The contours in this digital data set represent the regional potentiometric surface developed by Bedinger and Harrill (2004) to assess potential interbasin flow in... -
Federal
Simulated potentiometric surface contours of prepumping conditions in layer 16 of the transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
These simulated potentiometric surface contours represent prepumping (or steady-state) conditions for model layer 16 of the Death Valley regional ground-water flow... -
Federal
Reference springs in Nevada for the regional ground-water potential map by Bedinger and Harrill (2004), Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital geospatial data set is a compilation of reference points representing springs in Nevada that were used for the regional ground-water potential map by... -
Federal
Lateral boundary of the steady-state ground-water flow model by D'Agnese and others (2002), Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the lateral boundary of the area simulated by the steady-state ground-water flow model of the Death Valley regional ground-water flow... -
Federal
Simulated potentiometric surface contours at end of simulation (1998) in model layer 1 of the transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
These contours represent the simulated potentiometric surface at the end of simulation (1998) in model layer 1 of the Death Valley regional ground-water flow system... -
Federal
Reference springs in Nevada for the regional ground-water potential map by Bedinger and Harrill (2004), Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital geospatial data set is a compilation of reference points representing springs in Nevada that were used for the regional ground-water potential map by... -
Federal
Subregions of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the subregions of the transient ground-water flow model of the Death Valley regional ground-water flow system (DVRFS). Subregions are... -
Federal
Locations, values, and uncertainties of hydraulic-head observations for the steady-state, prepumped period of the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital geospatial data set contains the locations, values, and uncertainties of 700 hydraulic-head observations used in the steady-state, prepumped period of... -
Federal
Subregions of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the subregions of the transient ground-water flow model of the Death Valley regional ground-water flow system (DVRFS). Subregions are... -
Federal
Hydrogeologic map of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital dataset represents the surface hydrogeology of an approximately 45,000 square-kilometer area of the Death Valley regional ground-water flow system... -
Federal
Deserts of the southwestern United States, for the Death Valley regional ground-water flow system study, Nevada and California
Department of the Interior —
This digital data set defines the boundaries of the deserts of the southwestern United States. Those deserts include the Great Basin, Mojave, Colorado, and Sonoran... -
Federal
Potential structural barriers to ground-water flow, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital dataset defines the surface traces of regional geologic structures designated as potential ground-water flow barriers in an approximately 45,000 square-... -
Federal
Reference wells for the regional ground-water potential map by Bedinger and Harrill (2004), Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital geospatial data set is a compilation of reference points representing wells deeper than 300 meters in Nevada that were used for the regional ground-water... -
Federal
Estimated potentiometric surface by D'Agnese and others (1998), for the Death Valley regional ground-water flow system study, Nevada and California
Department of the Interior —
D'Agnese and others (1998) developed a potentiometric surface to conceptualize the regional ground-water flow system and to construct numerical flow models of the... -
Federal
Discharge areas for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set represents discharge areas in the Death Valley regional ground-water flow system (DVRFS) transient model. Natural ground-water discharge occurs... -
Federal
Estimated potentiometric surface by D'Agnese and others (1998), for the Death Valley regional ground-water flow system study, Nevada and California
Department of the Interior —
D'Agnese and others (1998) developed a potentiometric surface to conceptualize the regional ground-water flow system and to construct numerical flow models of the... -
Federal
Boundary of the Death Valley region by Bedinger and others (1989), for the Death Valley regional ground-water flow system study, Nevada and California
Department of the Interior —
This digital data set delineates the boundary of the Death Valley region that was first evaluated by the U.S. Geological Survey (USGS) as a potential hydrogeologic...