-
Federal
1 meter Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection NGDA
Department of the Interior —
This is a tiled collection of the 3D Elevation Program (3DEP) and is one meter resolution. The 3DEP data holdings serve as the elevation layer of The National Map,... -
Federal
Lidar Point Cloud - USGS National Map 3DEP Downloadable Data Collection NGDA
Department of the Interior —
This data collection of the 3D Elevation Program (3DEP) consists of Lidar Point Cloud (LPC) projects as provided to the USGS. These point cloud files contain all the... -
Federal
1/3rd arc-second Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection NGDA
Department of the Interior —
This is a tiled collection of the 3D Elevation Program (3DEP) and is 1/3 arc-second (approximately 10 m) resolution. The 3DEP data holdings serve as the elevation... -
Federal
ETOPO 2022 15 Arc-Second Global Relief Model
National Oceanic and Atmospheric Administration, Department of Commerce —
ETOPO 2022, a global relief model with 15 arc-second resolution seamlessly integrating topographic and bathymetric data. The ETOPO 2022 model uses a combination of... -
Federal
Lidar for Yosemite National Park
Department of the Interior —
Parkwide Quality Level 1 LiDAR was flown October 6-12 and 21-23, 2019. Acquisition occurred free of smoke, fog and cloud during a time frame absent of unusual... -
Federal
1 Arc-second Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection
Department of the Interior —
This is a tiled collection of the 3D Elevation Program (3DEP) and is 1 arc-second (approximately 30 m) resolution. The elevations in this Digital Elevation Model... -
Federal
1/9th Arc-second Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection
Department of the Interior —
This is a tiled collection of the 3D Elevation Program (3DEP) and is 1/9 arc-second (approximately 3 m) resolution.The 3DEP data holdings serve as the elevation layer... -
Federal
5 Meter Alaska Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection NGDA
Department of the Interior —
This is a tiled collection of the 3D Elevation Program (3DEP) covering Alaska only, and is 5-meter resolution. The 3DEP data holdings serve as the elevation layer of... -
Federal
Alaska 2 Arc-second Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection
Department of the Interior —
This is a tiled collection of the 3D Elevation Program (3DEP) and is 2 arc-second (approximately 60 m) resolution covering Alaska. The elevations in this Digital... -
Federal
2024 IN DNR Lidar DEM: Indiana Coastline
National Oceanic and Atmospheric Administration, Department of Commerce —
Original Product: These are Digital Elevation Model (DEM) data as part of the required deliverables for the lidar project. Class 2 (Ground) lidar points in... -
Federal
Lidar point cloud, elevation models, GPS data, imagery, and orthomosaics from multispectral and true-color aerial imagery data, collected during UAS operations at Marsh Island, New Bedford, MA on August 21st, 2024
Department of the Interior —
Small Uncrewed Aircraft Systems (sUAS) were used to collect aerial remote sensing data over Marsh Island, a salt marsh restoration site along New Bedford Harbor,... -
Federal
Coastal Relief Models (CRMs)
National Oceanic and Atmospheric Administration, Department of Commerce —
Coastal Relief Models CRMs provide seamless topographic and bathymetric bare-earth elevation profiles of coastal regions for US states and territories. Extents span... -
Federal
High-resolution digital elevation model for Mount Adams and vicinity, Washington, based on lidar surveys of August-September, 2016
Department of the Interior —
Mount Adams, also known by the Native American names "Klickitat" or "Pahto", is a 3,742 meter-tall (12,278 feet) stratovolcano located 53 km (33 miles) north of the... -
Federal
Utah FORGE: Area 0.5 m LiDAR Data
Department of Energy —
During the Fall of 2016 AGRC and the Utah Geological Survey acquired ~205 square miles of 8 points per meter Quality Level 1 LiDAR of The Frontier Observatory for... -
Federal
Hillshade raster (55-degree azimuth, 20-degree sun angle) derived from lidar data collected after the August 24, 2014 South Napa Earthquake
Department of the Interior —
Hillshade of lidar-derived, bare earth digital elevation model, with 55-degree azimuth and 20-degree sun angle, 0.25m resolution, depicting earthquake effects... -
Federal
Digital surface model (DSM) and digital elevation model (DEM) of the Los Padres Reservoir delta, Carmel River valley, CA, 2017-11-01
Department of the Interior —
This portion of the data release presents a digital surface model (DSM) and digital elevation model (DEM) of the exposed Los Padres Reservoir delta where the Carmel... -
Federal
Lidar Point Clouds (LPC) Derived from Lidar Data Collected by Small, Uncrewed Aircraft Systems (sUAS) in Three Study Areas in Colorado, 2020-22
Department of the Interior —
These light detection and ranging (lidar) point clouds (LPCs) were generated from lidar data collected during multiple field campaigns in three study areas near... -
Federal
CoSMoS (Coastal Storm Modeling System) Southern California v3.0 Phase 2 ocean-currents projections: 20-year storm in San Diego County
Department of the Interior —
Projected Hazard: Model-derived ocean current velocities (in meters per second) for the given storm condition and sea-level rise (SLR) scenario. Model Summary: The... -
Federal
High-resolution digital elevation model of Mount St. Helens and upper North Fork Toutle River basin, based on airborne lidar surveys of July-September, 2017
Department of the Interior —
The lateral blast, debris avalanche, and lahars of the May 18th, 1980, eruption of Mount St. Helens, Washington, dramatically altered the surrounding landscape. Lava... -
Federal
Geospatial data to assess karst aquifer systems between Albany and Buffalo, New York (ver. 4.0, January 2024)
Department of the Interior —
Using publicly available data for Ontario and Wayne counties, New York, a series of geospatial overlays were created at 1:24,000 scale to examine the bedrock geology,...