-
Federal
Characterization data on the effects of micro-computed tomography-based x-ray radiation on vinyl nitrile foam
Department of Commerce —
This dataset contains information from investigating the effects of micro-computed tomographic imaging irradiation on vinyl nitrile foam and code for a finite element... -
Federal
AMB2025-03 High-Cycle Rotating Bending Fatigue Tests of PBF-L Ti-6Al-4V
Department of Commerce —
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a... -
Federal
A Materials Properties Dataset for Elastomeric Foam Impact Mitigating Materials
Department of Commerce —
The database includes mechanical data for structure-properties relationships and mechanical modeling of elastic impact protection foams from a variety of imaging... -
Federal
Data from Fire Resilience of a Steel-Concrete Composite Floor System: Full-Scale Experimental Evaluation for Influence of Slab Reinforcement (Test #2)
Department of Commerce —
The National Institute of Standards and Technology conducted a series of large compartment fire tests to investigate the behavior and fire-induced failure mechanisms... -
Federal
Volume Fraction and Temperature Measurements of 30 cm Acetone, Ethanol, Methanol, Pool Fires
Department of Commerce —
This dataset documents a series of time-averaged gas species measurements made along the centerline of methanol, ethanol, and acetone pool fires steadily burning in a... -
Federal
AM Bench 2022 challenge Macroscale Tensile Tests at Different Orientations (CHAL-AMB2022-04-MaTTO)
Department of Commerce —
Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only. 96 tensile specimens... -
Federal
Data from "Full-Scale Experiments to Demonstrate Flammability Risk of Residential Upholstered Furniture and Mitigation Using Barrier Fabric"
Department of Commerce —
This study looks at fire growth in a furnished compartment intended to mimic a living room where a couch, either with or without a barrier fabric, served as the... -
Federal
Macroscale Compression at Different Temperatures and Orientations (CHAL-AMB2022-04-MaCTO)
Department of Commerce —
This challenge is to predict the macroscopic stress-strain response of compression samples across a range of temperatures taken from the base leg of the IN625... -
Federal
Digital control of a superconducting qubit using a Josephson pulse generator at 3 K
Department of Commerce —
Included here are data used to generate figures from the paper "Digital control of a superconducting qubit using a Josephson pulse generator at 3 K".Abstract: Scaling... -
Federal
AM Bench 2022 challenge problem Subcontinuum Mesoscale Tensile Test (CHAL-AMB2022-04-MeTT)
Department of Commerce —
One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was... -
Federal
Synthetic Temperature Data for Predicting Flashover Occurrence Using Surrogate Temperature Data
Department of Commerce —
This data set provides heat detector temperatures in a single-story ranch structure with a living room, kitchen, dining room, and three bedrooms. 20000 sets of... -
Federal
Evaluation of Thermal Optical Analysis Using an Aqueous Binary Mixture
Department of Commerce —
This dataset contains measurements of organic carbon, elemental carbon, and total carbon in atmospheric particulate matter with the thermal-optical carbon analyzer....