-
Federal
Data Sets for Evaluation of Building Fault Detection and Diagnostics Algorithms
Department of Energy —
This documentation and dataset can be used to test the performance of automated fault detection and diagnostics algorithms for buildings. The dataset was created by... -
Federal
Utah FORGE Project 3-2535: Numerical Modeling of Energized Steel-Casing Source for Imaging Stimulated Zone
Department of Energy —
This short report details and tests the workflow that will be used to simulate steel well casings in deviated production/extraction boreholes at at the Utah FORGE... -
Federal
EGS Collab Experiment 2: Core Logs
Department of Energy —
Core logs and photos from the EGS Collab project Experiment 2 for the Top Vertical well (TV4100) and the Top Horizontal well (TV 4100) on the 4100 Level of SURF (the... -
Federal
Coupling Subsurface and Above-Surface Models for Optimizing the Design of Borefields and District Heating and Cooling Systems
Department of Energy —
Accurate dynamic energy simulation is important for the design and sizing of district heating and cooling systems with geothermal heat exchange for seasonal energy... -
Federal
EGS Collab Experiment 1: Microseismic Monitoring
Department of Energy —
The U.S. Department of Energy's Enhanced Geothermal System (EGS) Collab project aims to improve our understanding of hydraulic stimulations in crystalline rock for... -
Federal
Shear Induced Permeability Test: Stripa Granite X-Ray CT Files and Explanation
Department of Energy —
This folder contains X-ray CT images and an explanation related to the shear induced permeability testing of Stripa granite -
Federal
S-Layer Nanosheet Binding of Zn and Gd
Department of Energy —
This data characterizes binding of Zn2+ and Gd3+ to engineered nanosheets at 40C and in a brine solution. The engineered nanosheets are composed of surface-layer... -
Federal
Reactive Transport Simulations of High-Tempertature Geologic Thermal Energy Storage (GeoTES) in Deep Saline Formations - I/O Files
Department of Energy —
Simulation input and output files, post-processed figures and excel tables, and tecplot layout files for generating figures. These simulations were run with... -
Federal
Water chemistry data and calculations for Fracture Sustainability Tests
Department of Energy —
Measured cation, anion, and silica are presented as well as calculations evaluating mass balance performed for 4 fracture sustainability tests under EGS conditions:... -
Federal
kISMET Core Photos and Descriptions
Department of Energy —
These core photos and descriptions were taken from the five boreholes that were drilled as part of the kISMET SubTER project conducted at the Sanford Underground... -
Federal
Utah FORGE Project 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements
Department of Energy —
The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical... -
Federal
Shear Induced Permeability Test: Stripa Granite Temperature Pressure and Displacement Data
Department of Energy —
Spreadsheet containing the raw measured data, calibrated data, and brief explanation of data for Test1 Stripa Granite Geomechanical/Geochemical Test. Stress on... -
Federal
Fracture Sustainability Pressure, Temperature, Differential Pressure, and Aperture Closure Data
Department of Energy —
In these data sets, the experiment time, actual date and time, room temperature, sample temperature, upstream and downstream pressures (measured independently),... -
Federal
Reactive Transport Modeling of Aquifer Thermal Energy Storage System at Stockton, NJ
Department of Energy —
This is the modeling data (input/output files of TOUGHREACT 4.10) used to simulate the reactive transport processes of the Aquifer Thermal Energy Storage (ATES)... -
Federal
EGS Collab Experiment 1: SIMFIP Notch-164 GRL Paper
Department of Energy —
Characterizing the stimulation mode of a fracture is critical to assess the hydraulic efficiency and the seismic risk related to deep fluid manipulations. We have... -
Federal
EGS Collab Experiment 1: Continuous Active-Source Seismic Monitoring (CASSM) Data
Department of Energy —
The U.S. Department of Energy's Enhanced Geothermal System (EGS) Collab project aims to improve our understanding of hydraulic stimulations in crystalline rock for... -
Federal
Fracture Sustainability Test, Pre- and Post-Test Photomicrographs
Department of Energy —
The primary objective of this research is to understand how different rock types, mineral and fluid compositions, and fracture surface textures determine the...