This part of DS 781 presents data for the bathymetric contours for several seafloor maps of the Offshore of San Francisco map area, California. The vector data file is included in "Contours_OffshoreSanFrancisco.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreSanFrancisco/data_catalog_OffshoreSanFrancisco.html. These data accompany the pamphlet and map sheets of Cochrane, G.R., Johnson, S.Y., Dartnell, P., Greene, H.G., Erdey, M.D., Golden, N.E., Hartwell, S.R., Endris, C.A., Manson, M.W., Sliter, R.W., Kvitek, R.G., Watt, J.T., Ross, S.L., and Bruns, T.R. (G.R. Cochrane and S.A. Cochran, eds.), 2015, California State Waters Map Series—Offshore of San Francisco, California (ver. 1.1, June 2015): U.S. Geological Survey Open-File Report 2015–1068, pamphlet 39 p., 10 sheets, scale 1:24,000, https://dx.doi.org/10.3133/ofr20151068. 10-m interval contours of the Offshore of San Francisco map area, California, were generated from bathymetry data collected by Fugro Pelagos and by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB). Mapping was completed between 2004 and 2008, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Bathymetric contours at 10-m intervals were generated from the merged 2-m bathymetric surface. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. Contours were smoothed via a polynomial approximation with exponential kernel (PAEK) algorithm using a tolerance value of 60 m. The contours were then clipped to the boundary of the map area. These data are not intended for navigational purposes.